Elfa CLASSIC Assembly Instructions

Things Youʼll Need -
For Overdoor Hook Method: Level.
For Into Door or Wall Method: Level, Pencil,
Drill or Screwdriver, and Hardware.

Component Options:

77-3/4" or
Residential or
94-5/16"
Commercial
Mounted
Overdoor
Standard
Hooks
with
Hardware
Small Mesh
Basket
Medium Mesh
Basket
Large Mesh
Basket
(Baskets are available in mesh and wire.
Ask a Specialist for assistance.)
Shoe Rack
Gift Wrap Rack
Utility Pegboard
Utility
Pegboard
Hooks
(Multiple styles
to choose from)
Utility Pegboard Boxes
(Multiple sizes to choose from)

Hardware Options:

Package of Ten Package of Five
Wood Screws Drywall Anchors
Package of Five Hollow
Door Anchors and Screws
Door & Wall Rack Assembly Instructions
• If not using the overdoor hooks, please ask for the best installation hardware
for your specific needs.

Installing with Overdoor Hooks

• Place the short Residential or Commercial
Overdoor Hook (that has a bolt) over the
top of the door.
• Attach the long Residential or Commercial
Overdoor Hook to the Standard under the
bottom of the door.
• Pull down to lock it in position. The bottom
hook should not be tight against the door.
• Use the included Allen Wrench to tighten
the top bolt.
HELPFUL TIP
• Fit the second set of slots on the Standard
over the hook.
• Using a Level, adjust the Standard until it is
square to the floor.