Elfa Platinum & Slate Movable Standing Desk Instructions For Easy Installation & Assembly

Advertisement

Your Customized Instructions for Easy Installation & Assembly
We know you will be amazed with the ease of installing elfa. If at any time during installation you have questions,
call the store listed on your receipt or 1-800-733-3532. You may also visit
video instruction.
Tools needed for the space:
Plastic mallet
Products needed for the space:
(Qty 2) Narrow Crossbar Platinum
(Qty 2) Narrow Mesh 1-Runner
(Qty 6) Narrow Mesh 2-Runner
(Qty 2) Narrow Mesh 3-Runner
These instructions are only for the items you purchased.
Malmo Nilsson Standing Desk on Casters Slate & Platinum Space # 6004745
Set of 4
Platinum
Platinum
Platinum

1. Getting Started

It's best to assemble an elfa Drawer Unit on a hard surface such as a concrete floor. If
you are unable to do so, you must protect your floor surface.
If you don't have a plastic mallet, you can use a hammer with a wood block to
protect the frame.
Visit containerstore.com/installation to watch elfa Installation and Assembly
Videos.
containerstore.com/installation
(Qty 2) 10-Runner Panels Platinum
Set of 2
to view
Page 1 of 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Platinum & Slate Movable Standing Desk and is the answer not in the manual?

Questions and answers

Summary of Contents for Elfa Platinum & Slate Movable Standing Desk

  • Page 1 Your Customized Instructions for Easy Installation & Assembly We know you will be amazed with the ease of installing elfa. If at any time during installation you have questions, call the store listed on your receipt or 1-800-733-3532. You may also visit containerstore.com/installation...
  • Page 2 2. Drawer Units Tools needed for this section: Plastic mallet Products needed for this section: (Qty 2) Narrow Crossbar Platinum (Qty 2) 10-Runner Panels Platinum (Qty 4) Drawer Back Stop Pins Set of 4 Set of 2 Galvanized Pkg/10 (Qty 2) Narrow Mesh 1-Runner Platinum (Qty 6) Narrow Mesh 2-Runner Platinum...
  • Page 3 Step 2 If using Back Stop Pins, install them in the back holes of the top runners before inserting • the top L-crossbars. Step 3 • Tap the top L-crossbars completely into each side panel. Step 4 Insert remaining Back Stop Pins •...
  • Page 4 Drawer Unit Accessories section. Congratulations! Your elfa solution is now complete! Thank you for your purchase and we look forward to seeing you again soon. Now that you have a fabulously organized elfa space, share it with us on Facebook at facebook.com/containerstore.

Table of Contents