Using The Call Function - Phiaton BonoBeats Lite Owner's Manual

11. USING THE CALL FUNCTION

1) Accepting a Call
- When an incoming call tone is heard through the headphones, press the MFB button.
(Volume control: While on a call, use the + / - button to control volume.)
2) Ending a Call
- While on a call, press the MFB button
3) Rejecting a Call
- When an incoming call tone is heard through the headphones, press and hold the MFB button for about 1 second.
(After hearing the 'beep' signal tone, the incoming call is rejected and the voice guidance "Call Ignored" is heard.)
4) Call Waiting
- When receiving another incoming call while on a call.
(Supported only when having applied for this service with your telecom provider.)
- Shortly Press the MFB button to place the current call on call waiting and connect the second call.
(Quickly double press the MFB button again to switch between the waiting call and connected call.)
- Press and hold the MFB button for about 1 second to end the current call and connect the second call.
5) Switching between Mobile Phone to BonoBeats Lite
- To switch the call from mobile phone to the headphone, press the MFB button for 1 second.
Status
Incoming Bell/Outgoing Bell
During Call
When two calls are connected
Battery use time
Status
Call Time
Music Play Time
Standby Time
10 min. Charging
Full Charging Time
※ The above times may differ depending on the environment in which it is used.
10
LED Indicator
Purple light blinks in 1.5 second intervals
Blue light slowly blinks every 6 seconds
Purple light slowly blinks every 6 seconds
Noise Cancelling 'ON'
Max. 34 hours
Max. 30 hours
Max. 40 hours
Max. 5 hours
About 2 hours