Download Print this page

Tools Required For Assembly - HAMPTON BAY 335-840 Instruction Manual

Antique bronze track tree floor lamp

Advertisement

Available languages

Available languages

Thank you for purchasing this Hampton Bay interior portable luminaire. This
product has been manufactured to the highest standards of safety and quality.
The durable finish and glass shade design provide for care-free maintenance.
Simply wipe with a clean towel to keep looking showroom new.
FEATURES:
1. Durable easy to maintain finish; simply wipe with a clean soft cloth to
keep looking new.
2. On/off switch provides just the right amount of light where it is needed.
3. Popular E27 lamp holder may be fitted with a CFL equivalent energy-
saving bulb.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service
Team at 1-877-527-0313 or visit www.homedepot.com. Please reference your
SKU 335-840 Antique Bronze Track Tree Floor Lamp when speaking to a
Customer Service agent.
CAUTION:
1. Before starting to assemble your portable luminaire, spread all parts out on
a clean flat surface. Inspect each part for defects that may have occurred
during shipping.
Important: Inspect the wire insulation for any cuts, abrasions or exposed
copper that may have resulted during shipping. If there is a defect in the wire,
DO NOT continue the assembly operation. Please call our Customer Service
Team at 1-877-527-0313.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY
ELECTRICAL QUESTIONS.
3. Keep your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR ASSEMBLY:

3 ea - 40-watt maximum
A bulb (or CFL equivalent)
(not included)
Page 2
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1 ea – Base (E)
1 ea – Body (A)
3 ea - Ring (G)
3 ea - Shade (F)
ASSEMBLY INSTRUCTIONS:
1. Screw Body (A) clockwise into Tube (B) until
secure; pull any excess cord through Tube
(B).
2. Repeat Step 1 for Tubes (C) and (D).
3. Screw Tube (D) clockwise into Base (E) until
secure; pull any excess cord through Base (E).
4. Place Shade (F) onto the socket. Secure with
Ring (G) by turning clockwise until tight.
5. Install a 40-watt maximum Type A (or CFL
equivalent) bulb into socket on Tube (A).
Page 3
3 ea - Tube (B,C,D)

Advertisement

loading