Removing The Unit - Pioneer DEH-770 Owner's Manual

Installation without the rubber bush Removing the unit
Dashboard
y
Nut (5 mm) f
Insert the release pin into the hole in the
i
bottom of the frame and pull out to
Drill 5-6.0 / Strap
thes eae
f
Be sure to use the strap to secure
remove the frame.
hole. x Z-7 the back of the unit in place. The
strap can be bent by hand to the
desired angle.
Screw
(5x 16 mm)
/
Position the accessory levers with the
tabs pointing up. Insert the levers into
the slots on both sides of the unit until
they lock into place. Pulling off the
levers makes it possible to remove the
unit from the dashboard.
7
20