Related Manuals for Shure DuraPlex DL4
Summary of Contents for Shure DuraPlex DL4
- Page 1 ™ DuraPlex Lavalier Microphones The Shure DuraPlex Lavalier online user guide. Version: 0.3 (2020-J)
-
Page 2: Table Of Contents
Shure Incorporated Table of Contents Threaded Mount Instructions DL4 DuraPlex™ Lavalier Microphones Accessories General Description Furnished Accessories Features Optional Accessories Replacement Parts Care and Maintenance Wiring and Termination DuraPlex Accessories Typical Wiring Table Presence Cap MTQG Connector Assembly Attaching the Windscreen... -
Page 3: Dl4 Duraplex™ Lavalier Microphones
Shure Incorporated DL4 ™ DuraPlex Lavalier Microphones General Description The Shure DuraPlex DL4 is a professional MEMS condenser lavalier microphone that is ideal for both speech and perfor mance applications in challenging environments. The IP57 rated omnidirectional lavalier is dust resistant and waterproof, man ufactured for use in applications that require extended durability, uncompromised sound quality, and reliability. The subminia ture design and various mounting options provide discrete placement in applications for film, television, education, and corpo rate events. Each microphone is supplied with a storage pouch, single tie clip, sticky vocal presence frequency response cap, snap fit windscreen, foam windscreen, and TA4F threaded adapter. -
Page 4: Duraplex Accessories
Shure Incorporated DuraPlex Accessories Presence Cap Frequency Response Attaching the Windscreen There are two windscreens for use with the DuraPlex microphone: A slide-fit windscreen for use with the presence cap 4/13... -
Page 5: Tie Clip
Shure Incorporated 2. A snap-fit windscreen for use without the presence cap Note: Do not use the snap-fit windscreen with the presence cap--the presence cap can become caught inside the snap-fit windscreen. Tie Clip 5/13... -
Page 6: Dual Tie Clip
Shure Incorporated Dual Tie Clip Sticky Mount Lavalier Distance 6/13... -
Page 7: Threaded Mount Instructions
Shure Incorporated Threaded Mount Instructions Accessories Furnished Accessories Furnished Acces DL4 Black DL4 Tan DL4 Cocoa DL4 White sories Single Tie Clip 95A43715 95C43715 95D43715 95A43715 Presence Cap 65A44182 65B44182 65C44182 65D44182 Snap-Fit Windscreen 95A16167 95B16167 95C16167 95D16167 Foam Windscreen... -
Page 8: Replacement Parts
Shure Incorporated TA4F/TQG XLR Preamplifier RPM400TQG Lemo XLR Preamplifier RPM400LEMO Black Dual Tie Clip, qty.1 95A44848 White Dual Tie Clip, qty.1 95B44848 Tan Dual Tie Clip, qty.1 95C44848 Cocoa Dual Tie Clip, qty.1 95D44848 Replacement Parts RPMDL4WS/B FOAM WINDSCREEN, BLACK, QTY. 5 RPMDL4WS/C FOAM WINDSCREEN, COCOA, QTY. -
Page 9: Wiring And Termination
Shure Incorporated RPMDL4DTC/B DUAL TIE CLIP, BLACK, QTY. 3 RPMDL4DTC/C DUAL TIE CLIP, COCOA, QTY. 3 RPMDL4DTC/T DUAL TIE CLIP, TAN, QTY. 3 RPMDL4DTC/W DUAL TIE CLIP, WHITE, QTY. 3 RPMDL4FC/B DL4/DH5 FREQ CAP, BLACK, QTY. 5 RPMDL4FC/C DL4/DH5 FREQ CAP, COCOA, QTY. 5 RPMDL4FC/T DL4/DH5 FREQ CAP, TAN, QTY. -
Page 10: Mtqg Connector Assembly
Shure Incorporated Re Cable Elec place Con trical Polari For Use Series ment Wiring Line Art (From Solder Side) struc De With Con tion sign nector 1.6mm cable Posi with 2 Red wire: Bias(2) tive con with All Shure Blue wire: Audio(3) DL4- duc... -
Page 11: Specifications
Shure Incorporated Specifications Note: • All specification values are based on using a typical bodypack with 5 V bias input or the RPM400MTQG preamplifier. When using the RPM400LEMO amplifier, refer to the RPM400LEMO specifications. • All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity. -
Page 12: Frequency Response
Shure Incorporated Positive pressure on diaphragm produces positive voltage LEMO on pin 3 with respect to pin 1 Cable Diameter 1.6 mm Cable Length 66 in. (1.67 m) Net Weight 15.0 g(0.53 oz.) 20.0 g(0.7 oz.) 1 Pa=94 dB SPL S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted... -
Page 13: Certifications
Shure Incorporated Certifications Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC per formance. The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: +49-7262-92 49 0 Fax: +49-7262-92 49 11 4 Email: info@shure.de...
Need help?
Do you have a question about the DuraPlex DL4 and is the answer not in the manual?
Questions and answers