Table of Contents
Advertisement
5
Place the suction cup in the center of the bottom edge of the cover screen, and lift
upwards while separating it with the opening pick.
As the cover screen can be damaged by excessive force, be careful not to damage
the cover screen.
If you have trouble creating a gap, heat the microwaveable heating bag
additionally, and apply it on the cover screen to further soften the adhesive. When
reheating, it should be heated no longer than 30 seconds.
6
Place the opening pick in the gap between the cover screen and the screen module
and increase the gap by pressing up/down/left/right on the bottom sides.
Leave the opening pick in the bottom edge to prevent the adhesive from resealing.
As the internal circuitry can be damaged, do not insert the opening pick more
than 1–2 mm.
Disassembly and Assembly
74
Advertisement
Table of Contents
