Sylvania 6632LG Owner's Manual page 20

When you connect external devices including a
video cassette recorder and home audio system,
you can easily switch the input mode with the
remote control.
_ptrr
ii : iiii!iiil;
1 Switch the input mode.
"When you press [INPUT SELECT] or [OH
A/T] on the remote control, the input mode will
be switched as below.
TV/DTV channel
!
Video|
!
Video2
I
Component1
0
Component2
!
HDMI
- To use the VIDEO1 or S-VIDEO1 INPUT jack on
the TV, select "Video1".
- To use the VIDEO2 or S-VIDEO2 INPUT jack on
the TV, select "Video2".
- To use the COMPONENT1 INPUT jacks on the
TV, select "Component1 ".
- To use the COMPONENT2 INPUT jacks on the
TV, select "Component2".
- To use the HDMI INPUT jack on the TV,
select "HDMr'.
• When you press [INFO], the current external
input mode, the type of resolutions for video
signal, TV aspect ratio CC and TV rating will be
displayed at the top-right of the screen.
1) When using VIDEO1 or S-VIDEO1 INPUT jack
2) When using VIDEO2 or S-VIDEO2 INPUT jack
3) When using COMPONENT1 INPUT jacks
4) When using COMPONENT2 INPUT jacks
5) When using HDMI INPUT jack
• The information display will automatically dis-
appear in one minute.
EN