Advertisement
D-2) Filter care
Central Filter (Fig. 1) Part no. AMC8F03D11G0
The central filter (foam filter), is installed in the dust bag compartment
to protect the motor from dirt.
When it becomes dirty, simply rinse it out in warm water and dry it
thoroughly before replacing.
To remove the centra! filter, hold the filter at the top (as illustrated)
and pull it out.
Important: Ensure that the filter is completely dry before re-installing
it into the cleaner.
Clean Air Filter S-Class (Fig. 2) Type F-3s
The clean air filter is installed in the rear side of the cleaner. This filter
retains any small dust particles which may be present in the expelled
air.
it is advisable to change the clean air filter when it becomes dirty. As
a guide, once or twice a year is usually sufficient depending on use.
To change the clean air filter, hold the exhaust cover (as illustrated) and
pul! it out.
IMPORTANT: Never use the cleaner without the correct
filters properly installed. Failure to do so may result in
damage to the motor.
Ift^
E-1) Re-usable cloth bag
Part no. AMC8F9931300
230-24QV~5QHz
1400W
1200W
7.5 kg
MC-E873K/MC-E873
230-240V~50Hz
1500W
1300W
313x460x243
7.5 kg
SPECIFICATIONS
j
MC-E871K/MC-E871
MC-E873K/MC
Power source
Max. output
Nominal output
Dimensions (WxLxH) mm
!
313x460x243
Net weight
Dusting brush
Upholstery nozzle
Crevice nozzle
Extension tube (2/pcs)
Telescopic tube
Floor nozzle with dust sensor
Floor nozzle
Design and specifications may be changed without notice.
Weight and dimensions shown are approximate.
Matsushita Electric Espana, S.A.
DIVISION DE ASPIRADORAS
Zona Industrial del Pollgono de CELRA
17460 CELRA (Girona) SPAIN
Z07P10900
MC-E875K/MC-E875
230-240V~50Hz
1500W
1300W
313x460x243
7.5 kg
100% recycled paper A
Printed in Spain
a
Advertisement
