1. Manuals
  2. Brands
  3. Original inside Manuals
  4. Farm Equipment
  5. FARO 3500 L/D
  6. Operator's manual

Original inside FARO 3500 L/D Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
GB
99 1612.GB.80I.0
FARO 3500 L / D
(Type 1611 : + . . 01001)
FARO 4000 L / D
(Type 1612 : + . . 01001)
FARO 4500 L / D
(Type 1613 : + . . 01001)
FARO 6300 L
(Type 1616 : + . . 01001)
FARO 8000 L
(Type 1618 : + . . 01001)
Silage wagon
Ihre / Your / Votre • Masch.Nr. • Fgst.Ident.Nr.
Ihre / Your / Votre • Masch.Nr. • Fgst.Ident.Nr.

Advertisement

Table of Contents
loading

Related Manuals for Original inside FARO 3500 L/D

Summary of Contents for Original inside FARO 3500 L/D

  • Page 1 All manuals and user guides at all-guides.com 99 1612.GB.80I.0 FARO 3500 L / D (Type 1611 : + . . 01001) FARO 4000 L / D (Type 1612 : + . . 01001) FARO 4500 L / D (Type 1613 : + . . 01001) FARO 6300 L (Type 1616 : + .
  • Page 2 All manuals and user guides at all-guides.com Dear Farmer You have just made an excellent choice. Naturally we are very happy and wish to congratulate you for having chosen Pöttinger. As your agricultural partner, we offer you quality and efficiency combined with reliable servicing.
  • Page 3 All manuals and user guides at all-guides.com INSTRUCTIONS FOR Dokument PRODUCT DELIVERY ALOIS PÖTTINGER Maschinenfabrik GmbH GEBR. PÖTTINGER GMBH A-4710 Grieskirchen Servicezentrum Tel. (07248) 600 -0 D-86899 Landsberg/Lech, Spöttinger-Straße 24 Telefax (07248) 600-511 Telefon (0 81 91) 92 99-10 / 21 Telefax (0 81 91) 59 656 GEBR.

  • Page 4: Table Of Contents

    All manuals and user guides at all-guides.com Table of conTenTs Table of contents Cutting unit monitoring ........... 6 Sensor test ............. 7 WARNING SIGNS Adjusting machines ..........7 Recommendations CE sign ..............6 Wireless Power Control - Control ......8 for work safety Meaning of warning signs.........
  • Page 5 All manuals and user guides at all-guides.com Table of conTenTs AXLES AND AXLE UNITS Lubrication points ........... 64 Maintenance work on wheels and brakes ....66 Maintenance work on the hydraulic running gear .. 68 Maintenance work on the BOOGIE running gear ... 69 TROUBLEShOOTING Troubleshooting ............

  • Page 6: Warning Signs

    All manuals and user guides at all-guides.com Warning signs CE sign Recommendations for work safety! The CE sign, which is affixed by the manufacturer, indicates outwardly that this machine conforms to the engineering guideline regulations and the other relevant EU guidelines. All points referring EU Declaration of Conformity (see Supplement).

  • Page 7: Putting Into Operation

    All manuals and user guides at all-guides.com PuTTing inTo oPeraTion General safety tips for using the trailer Take note! Tips for coupling and uncoupling the Tips for travelling with the trailer Observe also trailer the tips in the • Danger of injury exists when coupling the implement respective The handling of the tractor is influenced by the trailer to the tractor!

  • Page 8: Before Starting Work

    All manuals and user guides at all-guides.com PuTTing inTo oPeraTion Before starting work Instruction! The following tips Checking before operation a. Before commencing work, the operator must be aware should make of all operating devices and functions. The learning 1. Check that all safety equipment (coverings, casings, the trailer's of these is too late after having already commenced etc.) are in proper order and fitted in position on the...

  • Page 9: First-Time Connection To Tractor

    All manuals and user guides at all-guides.com firsT-TiMe connecTion To TracTor hydraulic connection Connecting hydraulic lines Note! Single-action control unit If oil should Should the tractor only have a single-action servo-valve, become warm then it is absolutely necessary to have an oil-return pipe during operation (T) fitted by a specialist.

  • Page 10: To Make The Connection To The Tractor

    All manuals and user guides at all-guides.com firsT-TiMe connecTion To TracTor To make the connection to the tractor Adjusting the hose container Important! Operation: - Adjust the hose container in such a way that there is sufficient distance between the hydraulic lines and the Before putting - Connect the -channel plug to the DIN 9680 socket drawbar (A2).

  • Page 11: Adjusting The Trailer Coupling

    All manuals and user guides at all-guides.com firsT-TiMe connecTion To TracTor Adjusting the trailer coupling Setting the pivoting drawbar - Extend the drawbar coupling (A) so that there is sufficient To allow pick-up to work properly, the height (H ) of coupled gap between drive shaft and drawbar of attached trailer, trailer must be correctly set (pick-up pivoting area).

  • Page 12: Locking The Trailing Front Axle

    All manuals and user guides at all-guides.com firsT-TiMe connecTion To TracTor Locking the trailing front axle Attention! • The trailing front axle is operated differently depending on tractor and wagon equipment The trailing front axle must always be locked during fast road travel with a full wagon!!! 137-06-04...

  • Page 13: Adjusting The Drawbar

    All manuals and user guides at all-guides.com aDJusTing THe DraWbar Adjusting the drawbar Mounting the DST 2000 type forked drawbar The vertically adjustable DST 2000 type forked pivoting drawbar is used for LoF-trailers (LoF=agricultural- or forest- Note! economical devices) with a laden weight of 22000 kg. Fabrication - The permissible supporting load is 2000 kg and assembly...

  • Page 14: Supporting Wheel

    All manuals and user guides at all-guides.com suPPorTing WHeel Raising the jack stand by hand Garaging the trailer - Couple the trailer to tractor • Park the trailer on firm, level ground. Attention! - Take load off jackstand by using pivoting drawbar. If the ground is soft then the area where the jack Only garage an stand is to stand must be appropriately increased...

  • Page 15: Pick-Up

    All manuals and user guides at all-guides.com Pick-uP Setting of Pick-up pivoting area Take care! To allow pick-up to work properly, the height (H ) of coupled • Setting procedure see chapter “First-time connection trailer must be correctly set (pick-up pivoting area). to Tractor”...

  • Page 16: Cutting Unit, Cutter Beam

    All manuals and user guides at all-guides.com cuTTing uniT, cuTTer beaM Cutting Unit Important! Lock the cutting beam with bolts Attention! Important checks to be carried out on the • Position E2 cutter beam before each operation Before any - on the left and right side of the vehicle operation check - left and right hand pins locked (E2) - secure both bolts with forelock (V)

  • Page 17: Swinging The Cutter Beam

    All manuals and user guides at all-guides.com cuTTing uniT, cuTTer beaM Swinging the cutter beam 3. Loosen plunger from cylinder (left and right) Swinging the cutter beam onto the left hand side of Attention! vehicle. Vehicle must not be driven whilst cut- ter beam is in fully extended position 4.

  • Page 18: Adjusting The Cutter Beam

    All manuals and user guides at all-guides.com cuTTing uniT, cuTTer beaM Adjusting the cutter beam Setting for cutter beam in swing-out position Setting should be so that when cutter beam is swung • When the cutter frame is swung back in, the setting out, the pins (B) should be approx.

  • Page 19: Checking The Clearance From The Blades To The Press Rotor

    All manuals and user guides at all-guides.com cuTTing uniT, cuTTer beaM Checking the clearance from the blades to the press rotor - The clearance between the blades and the press rotor should be at least 20mm. - adjust the stop screw (SK-) accordingly. 179-04-08 Checking 1.

  • Page 20: Tailgate

    All manuals and user guides at all-guides.com TailgaTe Safety mechanism Unloading using dispensing rollers The tailgate’s own weight is used to lower it to position Variations Attention! C. No other pressure is used. 1. Standard dispensing Nobody should • Rear steel section fixed to swivel frame be within the swinging range - secure with linch pin (F) (left and right)

  • Page 21: Removal Of Regulating Rollers

    All manuals and user guides at all-guides.com regulaTing rollers Removal of regulating rollers 1. Open trailer tailgate. Take care! Do not reach into 2. Relax chain tension (58) and take off drive regulating rollers chain (1). area while drive motor is still running.

  • Page 22: Scraper Floor Switch

    All manuals and user guides at all-guides.com regulaTing rollers Scraper floor switch General Note! Where regulating rollers are built in, the screw (SK-5) is situated behind the switch and has no function there. A greater injury The switch slider (90) is held in position A by means of a danger exists component on the regulating roller.

  • Page 23: Top Frame Section

    All manuals and user guides at all-guides.com ToP fraMe secTion Assembling the top frame section 4. Screw side panel with holder (S) Attention! • It is imperative that the machine stand horizontally and that two people carry out this modification. •...

  • Page 24: Direct Control - Operation

    All manuals and user guides at all-guides.com DirecT conTrol - oPeraTion "DIRECT CONTROL" operating unit Note: Operation is divided Meaning of control panel buttons into loading and unloading 1 Raising pivoting drawbar functions. Raise forage top frame The red symbols 2 Lower pivoting drawbar with the red LED Lower forage top frame...

  • Page 25: Loading Functions

    All manuals and user guides at all-guides.com DirecT conTrol - oPeraTion Loading functions - Loading functions are Safety hints! always activated after See the relevant Scraper floor back run switching on chapters in this Press button and hold (= touch function) - The LED in the I/O key operating manual! glows red...

  • Page 26: Unloading Functions

    All manuals and user guides at all-guides.com DirecT conTrol - oPeraTion Unloading functions Decrease scraper floor speed - Briefly press button Safety hints! - The mode is changed Briefly press button (= touch function) See the relevant - The LED in the I/O key chapters in this - decrease scraper floor back run speed glows green...

  • Page 27: Automatic Loader- Unloader

    All manuals and user guides at all-guides.com DirecT conTrol - oPeraTion Automatic Loader- unloader Take note! Check status: The automatic 1. Switch operating device off using button 8 loader needs to be (LED 8 does not light up) switched on only once.

  • Page 28: Power Control - Operation

    All manuals and user guides at all-guides.com PoWer conTrol - oPeraTion Configuration In order to ensure the correct power control function, the following connections must be checked: Safety tips! 1. 12 V power supply from tractor Please take 2. Connection: Operating device to tractor cable (ISO) particular .

  • Page 29: Power Control Initial Operation

    All manuals and user guides at all-guides.com PoWer conTrol - oPeraTion Power control initial operation WORk Menu loading functions Note! Switching on control panel by The following 1. Automatic loader operating - briefly pressing I/O button manual applies to trailers fitted with all additional equipment.
  • Page 30 All manuals and user guides at all-guides.com PoWer conTrol - oPeraTion 2. Loading the scraper floor 5. Lower pivoting drawbar As long as the button remains pressed - the front area of the wagon will be raised 6. Raising pivoting drawbar As long as the button remains pressed As long as the button remains pressed - the scraper floor moves at maximum speed...

  • Page 31: Work Menu Unloading Functions

    All manuals and user guides at all-guides.com PoWer conTrol - oPeraTion WORk menu unloading functions 2. Unload scraper floor / 2 phase motor 1. Automatic unloader Briefly press button - scraper floor is switched on or off Briefly press button - Indication on display - automatic unloader is switched on or off - slow or fast...
  • Page 32 All manuals and user guides at all-guides.com PoWer conTrol - oPeraTion 4. Regulating rollers 6. Trailing forward axle Briefly press button - regulating rollers are switched on or off Press button - indicator on display when rollers are switched on - trailing forward axle is switched on or off - status (open or closed) shows on the display Note!
  • Page 33 All manuals and user guides at all-guides.com PoWer conTrol - oPeraTion 7. Open tailgate 9. Stop Briefly press button - the drive stops - the current activated automatic function switches As long as the button remains pressed 10. To the left / Decreases - tailgate opens upward - opened tailgate is indicated on display Used to carry out the selected function...

  • Page 34: Set Functions

    All manuals and user guides at all-guides.com PoWer conTrol - oPeraTion 4. Extinguish operating data – daily counter SET functions Selection arrow points to the symbol for operating Continuous switching between individual set data functions is carried out with the “I/O” button - activate with “+”...
  • Page 35 All manuals and user guides at all-guides.com PoWer conTrol - oPeraTion 6. Scraper floor adjustment Set steps 1 or 19 with “SET” button Adapt scraper floor speed range to tractor hydraulics Selection step 1 Attention! Ensure the adjustment allows - Scraper floor speed scraper floor to run free.

  • Page 36: Diagnostic Functions

    All manuals and user guides at all-guides.com PoWer conTrol - oPeraTion Diagnostic functions Fault symbol meanings (from left to right) Job calculator switch outputs are monitored for - operating power - sensor power voltage - short circuits from earth or 12 v - cable breakage or - overload - Pick-up valve...

  • Page 37: Sensor Test

    All manuals and user guides at all-guides.com PoWer conTrol - oPeraTion Sensor test Adjusting machines The sensor test display can be reached from the WORK The CONFIG display can be reached from the WORK or or the DIAG mask by the TEST mask by - pressing the STOP button for 4 secs.

  • Page 38: Wireless Power Control - Control

    All manuals and user guides at all-guides.com Wireless PoWer conTrol - conTrol Charging the AC Take Note! - A prerequisite for trouble-free operation is that the terminal’s AC is sufficiently charged. The device is fitted with a high quality - The terminal is equipped with a micro-controller lithium-ion AC.

  • Page 39: Ac Discharge

    All manuals and user guides at all-guides.com Wireless PoWer conTrol - conTrol AC discharge Pairing Energy saving mode with AC operation - Pairing serves as a secure point to point connection. Information can be transferred only between paired - If the terminal is not being used when switched on (no partners.

  • Page 40: Isobus - Terminal

    All manuals and user guides at all-guides.com isobus - TerMinal Variant ISO Bus capable job calculator Operation with an ISO control terminal Joystick ISO Control panel ISO bus adaptor 10 Amp fuse Tractor cable with ISO Bus Variant Operation via ISO Bus tractor terminal Display Tractor terminal - 40 -...

  • Page 41: Operation Iso-Terminal

    All manuals and user guides at all-guides.com isobus - TerMinal Operation ISO-terminal STOP CONFIG F = Display menu T = Button numbering V = Variants - 41 - 0701_GB-ISoBUS-terminal_5543...

  • Page 42: Start Menu

    All manuals and user guides at all-guides.com isobus - TerMinal Start menu Note! Button indication: A grey soft key STOP means that it cannot be Base settings actuated at this Loading functions moment. Unloading functions Pressing on such a Data menu key will cause a Set menu window to appear...

  • Page 43: Unloading Menu

    All manuals and user guides at all-guides.com isobus - TerMinal Unloading menu Take Care! 1) Variant without cross conveyor belt If the automatic unloader is started when the Button indication: p.t.o. is turned STOP off, the warning Automatic unloading indicator “PTO” appears and a - Opening the tailgate warning signal...

  • Page 44: Unloading Menu

    All manuals and user guides at all-guides.com isobus - TerMinal Unloading menu Take Care! 1) Button indication: Variant with cross conveyor belt If the automatic STOP unloader is Preselect automatic unloading started when the - Switch to another mask p.t.o. is turned off, the warning T2.2 - Automatic unloader without cross conveyor indicator “PTO”...

  • Page 45: Data Menu

    All manuals and user guides at all-guides.com isobus - TerMinal Data menu Button indication: STOP Erase part counter Back a level Config-menu The CONFIG-mask can be reached by pressing the “STOP” button in the start mask (F1) for 10 seconds. - Switch further to the individual functions using the "DOWN "...

  • Page 46: Set Menu

    All manuals and user guides at all-guides.com isobus - TerMinal Set menu Note! Starting from Start Menu Before initial use of the - Press button 6 control several adjustments With that the Set Menu is reached must be made to enable proper Button indication: functioning.

  • Page 47: Test Menu

    All manuals and user guides at all-guides.com isobus - TerMinal 2. Loading and unloading instants Note! The value can be Unloading instant: Loading instant: increased for dry Setting the load limit for the scraper floor stand still Setting the load limit on the automatic scraper floor fodder.

  • Page 48: Diagnostic Menu

    All manuals and user guides at all-guides.com isobus - TerMinal Diagnostic menu Note! The alarms for the Starting from Start Menu power supply By pressing the “DIAG-->“ button for 12 secs - Press button 5 cannot be - Switching the diagnostic function off for all fault- switched off.

  • Page 49: Joystick - Loader Wagon Configuration

    All manuals and user guides at all-guides.com isobus - TerMinal Joystick - Loader wagon configuration Possible grouping: Note! Loading block Unloading block The keys are freely Further functions programmable. Note! The joystick will only become activated when the joystick key has been pressed for the first time and has been confirmed using...

  • Page 50: Uses Of Tractor Data

    All manuals and user guides at all-guides.com isobus - TerMinal Uses of tractor data Note! Various signals can be sent from the tractor to the job • Pressing the “F4 key” on the ISO-control operating For tractors calculator through the tractor signal 7-channel plug device causes the System menu to appear.

  • Page 51: Loading The Trailer

    All manuals and user guides at all-guides.com loaDing THe Trailer Loading process in general Starting the loading process Safety tips: important tips: 1. Switch on tractor’s p.t.o. • Turn off • A transfer, which is located on the drawbar, tells which 2.

  • Page 52: Unloading

    All manuals and user guides at all-guides.com unloaDing Unloading the trailer Unloading with regulating fittings - Open tailgate - Switch on p.t.o. drive - release regulating rollers - switch on automatic unloading - Switch on regulating rollers drive KB KV-Kr - Switch on scraper floor drive - Adjust scraper floor speed (see chapter „POWER CONTROL“) Unloading without regulating fittings...

  • Page 53: Maintenance

    All manuals and user guides at all-guides.com MainTenance Safety point Parking in the ope Safety points! • Turn engine off when adjustment, service and repair When parking in the open for work is to be done. long periods of time, clean •...

  • Page 54: Safety Points

    All manuals and user guides at all-guides.com MainTenance Safety points Opening the side protectors Note! • Do not work under the machine without safe Open the locking support. bar „R“ with a A greater injury suitable aid (e.g. danger exists screw driver) and when working s i m u l t a n e o u s l y...

  • Page 55: Pick-Up

    All manuals and user guides at all-guides.com MainTenance Pick-up - Broken tines (5) can be replaced after removing the corresponding stripper guard (54) without disassembling the pick-up. Air pressure Pick-up drive chain - Check chain tension every 80 runs. - Once a year remove chain guard, clean and oil chain.

  • Page 56: Press

    All manuals and user guides at all-guides.com MainTenance Press Transmission chain - Regulation of drive chain tension takes place through the tensioning screw (55) after loosening lock nut. - Tighten lock nut after tensioning chain. Main bearing - Both main bearings should be greased every 80 runs.

  • Page 57: Cutting Unit

    All manuals and user guides at all-guides.com MainTenance Cutting unit Note! Cutter removal In order to guar- - Swivel cutter bar out. antee the perfect - Pull catch lever (R) down using screwdriver. function of the cutter safety - Tilt cutter up (position A) and pull out backwards. device, frequent cleaning is rec- ommended.

  • Page 58: Removing A Stripper

    All manuals and user guides at all-guides.com MainTenance Removing a stripper Adjustment - Remove screws (S) and metal sheet. - From inside the load room pull stripper downward. Attention! Check gap (10 mm) after 200 trips A removed stripper. - 58 - 0800_GB-Wartung_1612...

  • Page 59: Transmission

    All manuals and user guides at all-guides.com MainTenance Transmission Chains Note! Change or at least top-up transmission oil once a year. Retension scraper Fill in oil acording to lubrication chart. Scraper floor chains floor chains with hydraulic lines The four scraper floor chains must be tensioned connected.

  • Page 60: Oil Pressure Switch

    All manuals and user guides at all-guides.com MainTenance Oil pressure switch Changing the filter Adjustment of oil pressure switch (): 220-20 bar The red tip (50) indicates that the oil filter (F) is soiled. (Setting value depends on tractor hydraulics) The distance to which the tip is pushed out dependsd on how soiled the filter is.

  • Page 61: Maintaining Electronic Parts

    All manuals and user guides at all-guides.com MainTenance Maintaining electronic parts • Protect operating unit (1) from water. - Do not leave in the open - Store in a dry area when not in use for longer periods • Cleaning the operating unit (1) - Use a soft cloth and mild household cleaner - Do not use solvents - Do not put operating board into liquid!

  • Page 62: Connecting The Brake Hoses

    All manuals and user guides at all-guides.com air brake uniT Service and maintenance on the air Connecting the brake hoses brake unit Attention! When connecting the brake hoses ensure: Draining water from the air reservoir Where applicable have all - that the hose- The air reservoir is to be drained of water daily.

  • Page 63: Release Position On The Brake Unit

    All manuals and user guides at all-guides.com air brake uniT Release position on the brake unit The release position enables wagon to move (shunt) when brake hoses are not connected to towing vehicle. - Depress control button (M) until stop. - Brakes are now released.

  • Page 64: Axles And Axle Units

    All manuals and user guides at all-guides.com axles anD axle uniTs Lubrication points Note! Steering arm bearing, top and underneath Rod adjuster After cleaning the (only with steering axles) - every 500 operating hours vehicle with a - after 40 operating hours - annually at the latest high pressure cleaner, all...
  • Page 65 All manuals and user guides at all-guides.com axles anD axle uniTs Changing grease in the wheel hub bearing Note! - every 1000 operating hours Only Li-Grease - annually at the latest (IV) with a drop • Jack vehicle up securely and release brakes. point above 190°...

  • Page 66: Maintenance Work On Wheels And Brakes

    All manuals and user guides at all-guides.com axles anD axle uniTs Maintenance work on wheels and brakes Check wheel nuts for tightness - after the first load run - after every wheel change - every 500 operating hours - annually Tighten wheel nuts crosswise with torque wrench.
  • Page 67 All manuals and user guides at all-guides.com axles anD axle uniTs Brake lining check - every 200 operating hours Note! Conditional to • Open viewing hole by pulling out the rubber stopper the function is (if available). to continually check brake wear •...

  • Page 68: Maintenance Work On The Hydraulic Running Gear

    All manuals and user guides at all-guides.com axles anD axle uniTs Maintenance work on the hydraulic running gear Attention! Check damping cylinder for condition and impermeability Sight check – every 200 operating - every 500 operating hours hours. Check all - annually at the latest components for damage and wear.

  • Page 69: Maintenance Work On The Boogie Running Gear

    All manuals and user guides at all-guides.com axles anD axle uniTs Maintenance work on the BOOGIE running gear Attention! Spring bracket and screws on the support axle Sight check - every 500 operating - the first time after the first load run hours- half yearly - every 500 operating hours at the latest.
  • Page 70 All manuals and user guides at all-guides.com axles anD axle uniTs Overview Lubrication and maintenance work See previous pages for an extensive description Grease Maintenance work Grease with special long-term grease (IV) Steering arm bearing, top and underneath Fixings for cylinder heads Bearings of brake shafts 1, 2, , 4 Rod adjuster...

  • Page 71: Troubleshooting

    All manuals and user guides at all-guides.com TroublesHooTing Troubleshooting Any machine is liable to develop faults now and again. The Safety points! list below is intended to make curing them easier. Never delay in finding a remedy. • Turn engine off when adjustment, service and repair work is to be...

  • Page 72: Disruptions And Remedies To Power Failure

    All manuals and user guides at all-guides.com elecTro-HYDraulics Disruptions and remedies to power failure The hydraulic block is located under the left front protective When there is a disruption in the electrical unit, the cover. required hydraulic function can be carried out by means of an emergency application.
  • Page 73 All manuals and user guides at all-guides.com elecTro-HYDraulics Variant DIRECT-CONTROL Up to 2006 model From 2006 model - 7 - 0600-GB-ELEKtRo-StoERUnG_1622...

  • Page 74: Technical Data

    All manuals and user guides at all-guides.com TECHNICal DaTa Position of Vehicle Identification Plate The factory number (Masch.Nr. / Fgst.Ident.Nr.) is imprinted on the accompanying Vehicle Identification Plate (as shown) and on the frame. Guarantee issues and further inquiries cannot be processed without the factory number being stated.

  • Page 75: The Defined Use Of The Trailer

    All manuals and user guides at all-guides.com TECHNICal DaTa The defined use of the trailer The trailer „FARO (Type 1611, 1612, 1613, 1616, 1618)“ is intended solely for normal use in agricultural work. • For the loading, transporting and unloading of roughage, green forage, silage and straw. Any other uses outside of these are regarded as undefined.

  • Page 76: Air Pressure

    All manuals and user guides at all-guides.com WHeels anD TYres Starting torque Check regularly that wheel nuts are firmly tightened (see ATTENTION! table for screw starting torque)! After the first 10 hours of operation retighten wheel nuts. ATTENTION! After the first 10 hours of operation retighten wheel nuts.

  • Page 77: Supplement

    All manuals and user guides at all-guides.com suPPleMenT GB-Anhang Titelblatt _BA-Allgemein...
  • Page 78 All manuals and user guides at all-guides.com The original cannot be copied ... Things will run better with genuine Pöttinger parts • Quality and precise fitting The decision must be made, ”original” or ”imitation”? The decision is often governed by price and a ”cheap buy” can sometimes be very expensive. - Operating safety.

  • Page 79: Recommendations For Work Safety

    All manuals and user guides at all-guides.com Recommendations for work safety suPPleMenT - a Recommendations for work safety 6.) Transport of persons prohibited All points refering to safety in this manual are indicated a. The transport of persons on the machine is not permitted. by this sign.

  • Page 80: Driveshaft

    All manuals and user guides at all-guides.com DriVesHafT Supplement - B Matching driveshaft to tractor Rules for working To determine the actual length required, hold the two Never exceed the maximum p. t. o. speed when using halves of the driveshaft side by side. the implement.
  • Page 81 All manuals and user guides at all-guides.com DriVesHafT Supplement - B how a cam type cut out safety clutch works This overload clutch switches the torque transmitted to zero if overloaded. To revert to normal operation, stop the p.t.o. drive briefly. The clutch reengages at a speed below 200 rpm.

  • Page 82: Lubrication Chart

    All manuals and user guides at all-guides.com FETT Schmierplan Plan de graissage Lubrication chart alle 8 Betriebsstunden Toutes les 8 heures de service after every 8 hours operation alle 20 Betriebsstunden Toutes les 20 heures de service after every 20 hours operation 40 F alle 40 Fuhren 40 F...
  • Page 83 All manuals and user guides at all-guides.com + 2006 80 F F E T T (IV) nr. 548.90.011.0 40 F (II)
  • Page 84 All manuals and user guides at all-guides.com - 2006...

  • Page 85: Lubricants

    All manuals and user guides at all-guides.com...
  • Page 86 All manuals and user guides at all-guides.com...

  • Page 87: Emergency Brake Valve

    All manuals and user guides at all-guides.com EmErgEncy brakE valvE Emergency brake valve Purpose. The emergency brake valve increases trailer-towing safety. An independent rollaway is prevented e.g. with a broken hitch or other conditions. The valve meets the legal requirements for trailers licensed to travel at 40 km/h.
  • Page 88 All manuals and user guides at all-guides.com EmErgEncy brakE valvE Electrically triggered emergency brake valve for trailer Mechanically triggered emergency brake valve for trailer -  - 000_GB-BrEmSVEnTIL_5543...

  • Page 89: Internal Hydraulic Supply For Cross Conveyor Belt

    All manuals and user guides at all-guides.com MainTenance Internal hydraulic supply for cross conveyor belt Attention! For tractors without LS-hydraulics, unloading using the cross conveyor belt is not possible without an internal supply (parallel operation necessary) Run the drive only with full enclosed In this case an internal hydraulic supply can be fitted to the wagon for the cross conveyor belt.
  • Page 90 All manuals and user guides at all-guides.com serVice - DirecT conTrol Hydraulics plan (up to 2006 model) Legend: P / T Pump / Tank Regulating rollers Y7 /Y8 Pivoting drawbar Scraper floor forward run Scraper floor back run Y11/Y12 Cutting unit Distributing valve lowering Y1/Y14 Tailgate...
  • Page 91 All manuals and user guides at all-guides.com serVice - DirecT conTrol Hydraulics plan (from 2006 model) Legend: P / T Pump / Tank Regulating rollers Y7 /Y8 Pivoting drawbar Scraper floor forward run Scraper floor back run Y11/Y12 Cutting unit Distributing valve lowering Y1/Y14 Tailgate...
  • Page 92 All manuals and user guides at all-guides.com serVice - DirecT conTrol Job calculator layout plan Note! All connector diagrams are viewed from outside. Colour code: blue brown green gnge green/yellow grey black white Legend: Sensor - Regulating rollers JR-Kabel: Job calculator cable Sensor - Tailgate JR-Verb: Job calculator connector cable...
  • Page 93 All manuals and user guides at all-guides.com serVice - DirecT conTrol Job calculator layout plan - PWM Note! All connector diagrams are viewed from outside. Colour code: blue brown green gnge green/yellow grey black white Legend: External button - Swing in cutting unit JR-Verb: Job calculator connector cable Scraper floor forward run...
  • Page 94 All manuals and user guides at all-guides.com serVice - PoWer conTrol Hydraulics plan Hydraulikplan Legend: Pump Y7/Y8 Pivoting drawbar Y11/Y12 Cutting unit Tank Y1/Y14 Tailgate Y1/Y2 Scraper floor - forward run / back run Y /Y4 Directional control valve - lowering / raising Scraper floor 2.
  • Page 95 All manuals and user guides at all-guides.com serVice - PoWer conTrol Connection diagram Note! All connector diagrams are viewed from outside. Colour code: blue brown green gnge green/yellow grey black white Legend: Sensors S4/1 Position cutting unit S4/2 Level flap on top S4/ Tailgate S4/4...
  • Page 96 All manuals and user guides at all-guides.com serVice - PoWer conTrol Tag distribution box Loading space lighting Forage reagent distributor Y15 Scraper floor 2. stage Y16 Trailing front axle Forage top frame Cross conveyor belt, left running Cross conveyor belt, right running Input reserve 1 Start scraper floor Moment rollers 1...
  • Page 97 All manuals and user guides at all-guides.com Appendix 1 EC Certificate of Conformity conforming to EEC Directions 98/37/EG ALOIS PÖTTINGER Maschinenfabrik Gesellschaft m.b.H. We ______________________________________________________________________ (name of supplier) A-4710 Grieskirchen; Industriegelände 1 __________________________________________________________________________________ (full address of company - where this concerns authorized agents within the Common Market, also state the company name and manufacturer) declare in sole responsibility, that the product Silage wagon...
  • Page 98 All manuals and user guides at all-guides.com Im Zuge der technischen Weiterentwicklung La société PÖTTINGER Ges.m.b.H améliore Following the policy of the PÖTTINGER Ges. arbeitet die PÖTTINGER Ges.m.b.H ständig constamment ses produits grâce au progrès m.b.H to improve their products as technical an der Verbesserung ihrer Produkte.
  • Page 99 All manuals and user guides at all-guides.com ALOIS PÖTTINGER Maschinenfabrik Gesellschaft m.b.h A-4710 Grieskirchen Telefon: 004 (0) 72 48 600-0 Telefax: 004 (0) 72 48 600-511 e-Mail: landtechnik@poettinger.co.at Internet: http://www.poettinger.co.at GEBR. PÖTTINGER GMBh Stützpunkt Nord Steinbecker Strasse 15 D-49509 Recke Telefon: (0 54 5) 91 14 - 0 Telefax: (0 54 5) 91 14 - 14 PÖTTINGER France...

This manual is also suitable for:

: faro 4000 l/dFaro 4500 l/dFaro 6300 lFaro 8000 l16111612 ... Show all

Table of Contents