Use Your Tv; Switching On Your Tv And Putting It In Stand-By Mode; Switching Channels - Philips 22PFL3505D User Manual

5 Use your TV

This section helps you perform basic TV operations.
Switching on your TV and putting it in
stand-by mode
To switch on
Press . POWER at the side of the TV or press . (Standby-On)
•
on the remote control.
To switch to standby
Press . POWER at the side of the TV or press . (Standby-On)
•
on the remote control again.
Note
•
Energy consumption contributes to air and water pollution. When the AC power
cord is plugged in, your TV consumes energy. Your TV has very low standby power
consumption.
EN
12
. POWER

Switching channels

Press CHANNEL + / − on the side of the TV. For digital channels, press
a number (1 to 135) followed by a dot " • " and then the corresponding
sub channel number (1 to 135). e.g. 108.30.
Press CH + / − or enter a number on the remote control.
•
• Press PREV CH to return to the previously viewed channel.
CHANNEL