Table of Contents
Advertisement
The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to
select a language and program channels after the set has been initialized.
To put the program back at the factory-default, initialize the LCD TV using the following procedure.
NOTE: Disconnect any device from the USB Port
before you conduct on this procedure.
1. Turn the power on.
2. Enter the service mode.
- To cancel the service mode, press [ ] button on
the remote control unit.
3. Press [BACK] button to enter the Control Panel
Key Confirmation Menu.
4. Press all buttons on the control panel.
5. Press [INFO] button to proceed with the self check
mode.
6. Make sure to confirm the "INITIALIZED: OK"
appears in the green screen.
7. Unplug the AC Cord and plug it back on again.
HOW TO INITIALIZE THE LCD TV
6-1
PL16.00INT
Advertisement
Table of Contents
