Table of Contents
Advertisement
1 - (Guide) / (List)
To open or close the Display Guide. Long press to open
the program list.
2 - (Volume)
Press + or - to adjust the volume level.
3 - Number keys
To select a program directly.
4 - AD
To access the Audio Description and toggle to switch on
and off.
5 -
Press + or - to switch to the next or previous in the list. To
open the next or previous page in Text/Teletext.
6 - (Mute)
To mute the sound or to restore it.
7 - (DASHBOARD)
To launch Dashboard on side of screen to access Settings,
device controls, notifications and more.
3.2. Pair Your Remote Control
to Display
This remote control uses both Bluetooth® and IR
(infrared) to send its commands to the display.
• You can use this remote control via IR (infrared) for
most operations.
• To use advanced operation like voice search, you need
to pair (link) the display with the remote control.
When you start the initial display installation, the display
invites you to press Home + Back key to pair the remote
control. It is suggested to complete the pairing during
the first display installation.
Note:
1 - Once the remote control has entered pairing mode
successfully, the blue LED indicator ring around the
microphone on the front side of the remote control
starts blinking.
2 - The remote control must be kept close to the display
(within 1m distance) during pairing in order to ensure
success.
3 - If the display does not launch the voice control
field when press , pairing was unsuccessful.
4 - It is advisable to wait until the set has fully started up
and launched all background processes before pairing
mode is entered as the toast message containing further
instructions may appear too late, thereby negatively
impacting the pairing procedure.
Pairing or pairing again
If the pairing with the remote control was lost, you can
pair the display with the remote control again.
You can press Home + Back key or long press the PAIR
(SOURCES) key (approximate for 3 seconds) for pairing.
Alternatively, go to Settings > Remote &
accessories > Remote control settings > Pair remote
control, then follow the on-screen instructions.
A message appears when the pairing is successful.
Remote Control Software
Settings > Remote & accessories > Remote
control settings > Remote control info
Once the remote control is paired, you can check the
current remote control software version.
Settings > Remote & accessories > Remote
control settings > Update remote control software
Check available remote control software for updates.
3.3. Voice Search
You can search for videos, music or anything else on the
Internet by simply using your voice. You can speak into
the microphone on the remote control.
You need to pair the remote control to the display
before use voice search.
To use Voice:
1 - Press and hold the key on remote control, the blue
light on the remote control lights up and the search field
opens, the microphone is active.
2 - Speak out what you are looking for with clear
pronunciation. Once the voice input is done, release
the key to start the search. It might take some time for
the results to appear.
3 - In the list of search results, you can select the item you
want.
9
Advertisement
Table of Contents
