Philips 82 8 Series User Manual page 34

returns, the update will continue.
To prevent an accidental update of the display software,
delete the autorun.upg file from the USB flash drive.
Automatic Software Update
To switch on Automatic software update to update
your display software automatically. Leave the display in
standby.
1 - Select  Settings > System > About > System update
> Automatic Software Update.
2 - Follow the on-screen instruction.
3 - Press  (left) repeatedly if necessary, to close the
menu.
When the setting is enabled, the upgrade gets
downloaded when the display is powered ON and
installed 15min after the display has gone to standby (as
long as there are no alarms scheduled).
When the setting is disabled, the "Upgrade Now" /
"Later" OSD will be shown.
View Software Update History
Display the list of software versions that are successfully
update on the display.
To view the software update history:
1 - Select  Settings > System > About > System update
> View software update history.
2 - The software update history on this display will be
listed.
Reset
Rinstall display
 Settings > System > About > Reset > Factory reset.
Reinstall and redo the complete display installation.
Reset all settings value to original display settings
 Settings > System > About > Reset > Factory settings.
Reset all settings to factory settings.
Status
Display display status information
 Settings > System > About > Status.
To display the display status about IP address, Device,
MAC address, Bluetooth® address, Serial Number, etc.
Legal Information
Open Source Software
This display contains open source software. TP Vision
Europe B.V. hereby offers to deliver, upon request, a copy
of the complete corresponding source code for the
copyrighted open source software packages used in this
product for which such offer is requested by the
respective licences.
This offer is valid up to three years after product
purchase to anyone in receipt of this information.
To obtain the source code, please write in English to . . .
open.source@tpv-tech.com
Open Source License
About Open Source License
README for the source code of the parts of TP Vision
Europe B.V. display software that fall under open source
licenses.
This is a document describing the distribution of the
source code used on the TP Vision Europe B.V. display,
which fall either under the GNU General Public License
(the GPL), or the GNU Lesser General Public License (the
LGPL), or any other open source license. Instructions to
obtain copies of this software can be found in the
Directions For Use.
TP Vision Europe B.V. MAKES NO WARRANTIES
WHATSOEVER, EITHER EXPRESS OR IMPLIED, INCLUDING
ANY WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, REGARDING THIS
SOFTWARE. TP Vision Europe B.V. offers no support for
this software. The preceding does not affect your
warranties and statutory rights regarding any TP Vision
Europe B.V. product(s) you purchased. It only applies to
this source code made available to you.
System Information
To view the current display software version:
1 - Select  Settings > System > About > Model,
Android display OS version, Android security patch
level, Kernel version, Android display OS build, SW
version, Netflix ESN, Nagra device ID.
2 - The version, release notes and creation date are
shown. Also, the Netflix ESN Number and other
information are shown if available.
3 - Press  (left) repeatedly if necessary, to close the
menu.
34