Johnson Controls ioSmart KT-MUL-MTKP2 Quick Start Manual

Guide de démarrage rapide du lecteur de cartes ioSmart Gen 2
Technical Specifications
Model
RF technologies
Power consumption (mA) at 12
VDC Peak / AVG
Weight
Capacitive Touch Keypad with
backlighting
Read range 125 kHz
ioProx ID-1 credentials (Cards)
Read range 13.56 MHz
MIFARE Plus EV1, encrypted
sector, ID-1 credentials (Cards)
Mounting
Dimension
(H x W x D)
Supported credentials 125 kHz
Supported credentials 13.56 MHz
Supported credentials BLE
(Bluetooth low energy) 2.4 GHz
Wiring terminal
Tamper
Wiegand communication formats
Sounder
Security
Output
Operating temperature
Operating humidity
LED indicator
Inputs in Wiegand mode
Inputs in RS-485
Inputs in BLE panel-less
Input voltage
Housing
Flammability rating
Firmware
Ingress protection rating
Communication
Cabling
Warranty
Certifications
ioSmart Gen 2 Card Reader Quick Start Guide /
Mullion / Meneau de porte
Mullion
KT-MUL-MT-
KT-MUL-MT2
KP2
13.56 MHz 13.56 MHz
125 kHz 125 kHz
210 mA / 190 mA /
100 mA 100 mA
110 g 110 g
(0.24 lb) (0.24 lb)
Yes No
Up to 5.0 cm (1.9 in.)
Up to 4.5 cm (1.7 in.)
Mullion
115.8 x 44.6 x 24.7 mm (4.56 x 1.75 x 0.97 in.)
Kantech ioProx XSF cards
HID Prox cards
13.56 MHz: ioSmart SSF. 32-bit/56-bit CSN/UID: iClass, iClass SE, Mifare Plus EV1/2 (ISO-14443A), Mifare
Desfire (ISO-14443A), Mifare Desfire EV1/2/3 (ISO-14443A), Mifare Classic (ISO-14443A) and ISO-14443B.
ioSmart mobile credentials and smart keys
6 screwless poles
Optical
Kantech SSF/XSF 26/34 bits and HID Prox
Integrated
AES-128 bit encryption: Between the ioSmart card, the reader, and the controller (RS-485 or OSDP).
AES-256 bit encryption: Between the ioSmart Mobile Credential (BLE) and reader. Refer to the ioSmart
Card Reader Installation Guide for more information.
RS-485 or BLE panel-less: 1 supervised open-drain, up to 750 mA
- 40°C to +70°C (- 40°F to +158°F). - 35°C to +66°C (- 31°F to +151°F) for UL listed product.
0 to 95% non-condensing. UL verified at 85% Rh.
Multi-color bar: Red, green, yellow, blue. Configurable.
LED and buzzer
2 to 4, configurable
2 configurable
8.5 VDC to 16 VDC (provided by UL 2610, UL 294, or UL 603 listed, power limited power source).
Polycarbonate, smoked black
UL94 V-2
Fully upgradable using Kantech RS-485
IP66. See the ioSmart Card Reader Installation Guide for more information.
RS-485, Wiegand, OSDP, or BLE
3 twisted pairs of AWG 22 unshielded or CAT5, up to 150 m (500 ft). Refer to the ioSmart Card Reader
Installation Guide for more information about wiring distances.
Limited lifetime
FCC, IC, CE, UKCA, UL 294, UL 2610, FIPS 197, RoHS, WEEE.
For RS-485, NIST CAVP validation number AES 3667, key length 128.
KT-MUL- KT-MUL-SC- KT-SG-MT-
SC2 KP2
13.56 MHz
13.56 MHz 13.56 MHz
125 kHz
190 mA / 210 mA / 210 mA /
100 mA 100 mA 100 mA
105 g 110 g
(0.23 lb) (0.24 lb)
No Yes
--
Kantech ioProx: XSF cards
--
HID Prox cards
Single Gang
KT-SG-MT2 KT-SG-SC2
KP2
13.56 MHz
13.56 MHz
125 kHz
190 mA / 190 mA /
100 mA 100 mA
175 g 170 g 165 g
(0.4 lb) (0.37 lb) (0.36 lb)
Yes No
Up to 7.5 cm (2.9 in.)
Up to 5.9 cm (2.3 in.)
Single Gang, North America / Europe
115.8 x 71.5 x 24.7 (4.56 x 2.81 x 0.97 in.)
KT-SG-SC-
KP2
13.56 MHz
210 mA /
100 mA
175 g
(0.4 lb)
No Yes
--
--