Johnson Controls KT-MUL-MT-KP Installation Sheet
Johnson Controls KT-MUL-MT-KP Installation Sheet

Johnson Controls KT-MUL-MT-KP Installation Sheet

Smart card readers
Hide thumbs Also See for KT-MUL-MT-KP:

Advertisement

Available languages

Available languages

Quick Links

Technical Specifications

Model
RF technologies
Power consumption (mA) @ 12
VDC Peak / AVG
Weight
Capacitive Touch Keypad with
backlighting
Typical read range 125 kHz
ioProx ID-1 credentials (Cards)
Typical read range 13.56 MHz
MIFARE Plus EV1, encrypted
sector, ID-1 credentials (Cards)
Mounting
Dimension
(H x W x D)
Supported credentials 125 kHz
Supported credentials 13.56 MHz
Supported credentials BLE
(Bluetooth low energy) 2.4 GHz
Wiring terminal
Tamper
Wiegand communication formats
Sounder
Security: AES-128 bit encryption
Security: AES-256 bit encryption
Output
Operating temperature
Operating humidity
LED indicator
Inputs in Wiegand mode
Inputs in RS-485
Inputs in BLE panel-less
Input voltage
Housing
Flammability rating
Firmware
Ingress protection rating
Communication
Cabling
Warranty
Certifications
Note: For more information about wiring distances, refer to the ioSmart Card Reader Installation Guide.
Smart card readers / Lecteurs de cartes à puce
Mullion / Meneau de porte
KT-MUL-MT-KP KT-MUL-MT
13.56 MHz
125 kHz
200 mA / 80 mA 120 mA / 70 mA 120 mA / 70 mA 200 mA / 80 mA 120 mA / 70 mA
110 g (0.24 lb) 110 g (0.24 lb) 105 g (0.23 lb)
Yes
Up to 5.1 cm (2 in.)
Up to 3.8 cm (1.5 in.)
115.8 x 44.6 x 24.7 mm (4.56 x 1.75 x 0.97 in.)
ioProx and HID®
MIFARE Plus EV1, iClass CSN, and ISO/IEC 14443A/14443B/15693 CSN
ioSmart mobile credentials and smart keys
6 screwless poles
Optical
Kantech SSF, Kantech XSF, 26-bit, 34-bit, HID Prox
Integrated
From the ioSmart card to the reader. From the reader to the access control unit over RS-485.
From the ioSmart mobile credential to the reader. Not verified by UL.
RS-485 or BLE panel-less: 1 supervised open-drain, up to 750 mA
- 40°C to +70°C (- 40°F to +158°F). - 35°C to +66°C (- 31°F to +151°F) for UL listed product.
0 to 95% non-condensing. UL verified at 85% Rh.
Multi-color bar: Red, green, yellow, blue. Configurable.
LED and buzzer
2 to 4, configurable
2 configurable
8.5 VDC to 16 VDC (provided by UL 294 or UL 603 listed, power limited power source).
Polycarbonate, smoked black
UL94 V-2
Fully upgradable using RS-485
IP55 (not verified by UL)
Wiegand, RS-485 (AES-128), OSDP (AES-128 using RS-485), or BLE (AES-128, or AES-256, not veri-
fied by UL)
3 twisted pairs AWG 22 unshielded or CAT5, up to 150 m (500 ft)
Limited lifetime
FCC, IC, CE, UL 294, UL 1076, UL 2610, FIPS 197, RoHS, WEEE.
For RS-485, NIST CAVP validation number AES 3667, key length 128.
Mullion
KT-MUL-SC
13.56 MHz
13.56 MHz
125 kHz
No
No
--
Mullion
--
Single Gang
KT-SG-MT-KP
KT-SG-MT
13.56 MHz
13.56 MHz
125 kHz
125 kHz
175 g (0.4 lb)
170 g (0.37 lb)
Yes
No
Up to 6.8 cm (2.7 in.)
Up to 4.3 cm (1.7 in.)
Single Gang, North America / Europe
115.8 x 71.5 x 24.7 (4.56 x 2.81 x 0.97 in.)
ioProx and HID®
KT-SG-SC
13.56 MHz
120 mA / 70 mA
165 g (0.36 lb)
No
--
--

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KT-MUL-MT-KP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Johnson Controls KT-MUL-MT-KP

  • Page 1 Smart card readers / Lecteurs de cartes à puce Mullion / Meneau de porte Technical Specifications Mullion Single Gang Model KT-MUL-MT-KP KT-MUL-MT KT-MUL-SC KT-SG-MT-KP KT-SG-MT KT-SG-SC RF technologies 13.56 MHz 13.56 MHz 13.56 MHz 13.56 MHz 13.56 MHz 13.56 MHz...
  • Page 2 Smart card readers / Lecteurs de cartes à puce Single Gang / Boîte électrique simple Spécifications techniques Meneau de porte Boîte électrique simple Modèle KT-MUL-MT- KT-MUL-MT KT-MUL-SC KT-SG-MT-KP KT-SG-MT KT-SG-SC Fréquences de transmission 13,56 MHz 13,56 MHz 13,56 MHz 13,56 MHz 13,56 MHz 13,56 MHz 125 kHz 125 kHz 125 kHz 125 kHz...
  • Page 3 Smart card readers / Lecteurs de cartes à puce Mounting instructions To install the reader, complete the following steps: 1. Pull the cable from the wall through the hole of the mounting plate. 2. Attach the mounting plate to the wall. 3.
  • Page 4 BUZ comme une sortie de verrouillage en mode BLE sans panneau, avec contacts d'entrée en option. © 2022 Johnson Controls. All rights reserved. JOHNSON CONTROLS and KANTECH are trademarks of Johnson Controls. Specifications may change without notice. Telephone: 1-888-222-1560 or 1-800-507-...

This manual is also suitable for:

Kt-mul-mtKt-mul-scKt-sg-mt-kpKt-sg-mtKt-sg-sc

Table of Contents