Up/Down Keys - Kenwood TH-415A Instruction Manual

@ DOUBLE ROLE KEYS
PRIORITY BEEP
CARRIER KEY LOCK [=] [ere]
The 1st function is printed on the key.
The 2nd function is printed above the key.
@ Numeric keys:(1_ |.(9_|, (0 _|
@ UP/DOWN keys: [4], [¥ |
@ F: Function exchange key
The [F_] key is used to activate the 2nd function.
The F indicator is displayed for approx. 5 seconds after
pressing the [F_] key.
CAUTION:
You must press the 2nd function while the F indicator is lit, or the
radio will perform the function printed on the key, rather than the
function printed above it.
@ M: Memory key
The [M_] key is used to select the desired memory chan-
nel.
The operation is similar to that of the [F_] key, in that, the
M indicator will illuminate for 5 seconds in the LCD display.
CAUTION:
The memory channel must be selected within 5 seconds of press-
ing the [M_| key.
@ ENTER key
The key is used to enter a frequency selected by
the numeric keys.
@ SCAN key
The
[SCAN] key is used to start or stop the scan function.
To cancel this function, press these keys again.