Memory Channel Lockout; Memory Back-Up Battery - Kenwood TH-415A Instruction Manual

@ MEMORY CHANNEL LOCKOUT
The Memory Channel Lockout function allows you to tem-
porarily skip unwanted memory channel(s).
1. Select the memory channel you wish to skip.
2. Press the [F_| key. The F indicator will illuminate.
3. Press the [0] key within 5 seconds. The selected
memory channel number will flash as an indication the
Memory Channel has been locked out.
NOTE:
The channel number will not flash while the display is
showing M and the listing of the memory channels that
contain data. It will only flash when you recall the in-
dividual memory channel from the front panel directly.
4. To cancel the lockout press the desired memory channel
number key and then press the [F | and [0 | keys
again.
@ CLEARING A SPECIFIC MEMORY CHANNEL
1. Press the [(M_] key. The display will
indicate M and any memory channels i
that contain data. (Ex. 1, 4, 5, 7, 8, 9) 71819]
M
2. Press the [F | key. The F indicator
will illuminate. a
171819)
FM
3. Press the key that corresponds to the
channel you want to clear (Ex. 7)
within 5 seconds of pressing the
{F |] key. The M, F, and channel
number display will clear indicating
the operation has been completed.
4. To confirm the data was erased press
the [M_] key. 8
(From our example the will now be 8
gone.)
@ CLEARING ALL MEMORIES
(= Microprocessor Initialization)
To erase all data from the memories, turn the power switch
on while pressing both the [F | and the [ENTER] keys
together.
=0
@ MEMORY BACK-UP BATTERY
The transceiver includes a lithium back-up battery to retain
memory in the microprocessor. When changing batteries,
or if the Ni-Cd batteries should fully discharge, memory will
always be retained.
If the display should begin to show erroneous information
or numbers, the lithium battery needs replacement.
This should be performed by an authorized KENWOOD
dealer since these components are easily damaged by
static electricity.
@ PRIORITY ALERT CHANNEL CHECK
Memory channel 1 can be monitored at about 5 seconds in-
tervals to check for activity.