Power Management; Automatic Powersaving - Philips 228C3LHSB User Manual

5. Power Management

5. Power Management

5.1 Automatic PowerSaving

If you have VESA DPM compliance display card
or software installed in your PC, the monitor can
automatically reduce its power consumption when
not in use. If an input from a keyboard, mouse or
other input device is detected, the monitor will
'wake up' automatically. The following table shows
the power consumption and signaling of this
automatic power saving feature:
Power Management Definition (228C3L)
VESA Video H-sync
Mode
Active ON Yes
Sleep (typ.) OFF No
Switch Off OFF -
Power Management Definition (228C3LH)
VESA Video H-sync
Mode
Active ON Yes
Sleep (typ.) OFF No
Switch Off OFF -
The following setup is used to measure power
consumption on this monitor.
Native resolution: 1920x1080.
Contrast: 50%
Brightness: 250 nits
Color temperature: 6500k with full white pattern
Note
This data is subject to change without notice.
V-sync Power Used LED color
Yes 20.23W (typ.) White
No < 0.3W White
(Blinking)
- < 0.3W OFF
V-sync Power Used LED color
Yes 20.79W (typ.) White
No < 0.3W White
(Blinking)
- < 0.3W OFF
28