Resolving Conflicts In Windows 98Se/Me; Resolving Conflicts In Windows 2000/Xp - Creative Blaster Modem Getting Started Manual

Resolving Conflicts
in Windows
98SE/ME
If you are unsure of which
peripheral device is causing the
conflict, you can isolate the source
of the problem by temporarily
removing all devices (except your
modem and essential devices such
as the disk controller). After that,
add the devices back one at a time
until the device that is causing the
conflict is found.
Resolving Conflicts
in Windows 2000/
XP
To run Device Manager:
1. Click Start -> Settings -> Control Panel.
2. Click the System icon. The System Properties dialogue box appears.
3. Click the Device Manager tab.
4. Double-click Modem.
5. Select your modem and click the Properties button. The Properties dialogue box of the modem
appears.
6. Click the Resources tab.
7. Click the Use Automatic Settings check box to select it. If this check box is already selected, you
need to go to the Properties dialogue box of the conflicting peripheral device and select the same
check box there.
8. Restart your system to allow Windows 98SE/Me to reassign resources to your modem and/or the
conflicting peripheral device.
To run Device Manager:
1. Click Start -> Settings -> Control Panel.
2. Click the System icon. The System Properties dialogue box appears.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Double-click Modem.
6. Click the name of your modem.
7. Right-click the name of your modem.
A menu appears.
8. Select the Properties option.
9. Click the Resources tab.
Troubleshooting B-3