Advertisement
IMPORTANT SAFETY INSTRUCTIONS
WARNINdr: When using dettiic producis, basic cautions should always be followed, including the following,
1.
Read all safety and operalinginstiuctions before using tbispioduct.
2.
All safety and operating iaslruclkiiis should be retained for future reference.
3.
Obey all cautions iiube operating instmctions and on the back of the unii.
4.
All operaiirg instrucii ons shouId be fol lowed.
5.
This product should not be used near water, i.e. a bathtub, sink, swimmingpocl. wet basemenu etc.
6.
This product should be located so that its position does not interfere with its proper vencilaiion. It should not be placed flat against a
wall or placed in a built-in enclosure that will impede the flow of cooling air.
7.
This product should not be placed near a source of heat such as a stove, radiator, or another heat producing amplifier.
8-
Connect only to a power supply of the type marked on the unit adjacent to the power supply cord,
9-
Never break off the ground pm on the power supply cord, For more mfon nation on grounding, wiite for our free booklet ''Shock
Hazard and Grounding. '
10-
Power supply cords should always be handled carefully. Never walk or place equipment on power supply cords. Periodically check
cords for cuts la signs of stress, especially at the plug and die point where the cord exits (he unit,
11.
The power supply cord should be unplugged when the unit is to be unused for long peiirxls of rime.
12.
If this produci is in be mounted in an equipniem rack, rear support should he provided.
13.
Metal parts can be cleaned with a damp rag The vinyl covering used on some units can be cleaned with a damp rag or an ammonia-
based household cleaner if neccssaiy. Disconnect unit tfom power supply before cleaning.
14.
Care should be taken so that objects do not fail and liquids arc not spilled into the unit through the ventilation holes or any wher
openings.
15.
This unit should be checked by a qualified service technician if:
a.
The power supply cord or plug has been damaged.
b.
Any thing has fallen or been spilled into the uniL
c.
The unit docs not operate conectly.
d.
The unit has been dropped or the enclosure damaged.
16.
The user should not attempt to service this equipment. All service work should be done by a qualified service technician.
17.
This product should be used only with a cart or stand that is recommended by Peavey Elec ironies .
18.
Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in susceptibility lo noise
induced he tiring loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a SLifficieni time.
The L'.S. Government's Occupational Safety and Health Administration (OSHA) ba^ ipccificd the following permissible noise level
exposures.
Duration Per Day In Hrxir';
Sound t.evel dBA, Slow Response
8
90
6
92
4
95
3
97
2
100
1 1/2
102
1
105
H2
no
U4 or less
115
According lo OSHA, any exposure in excess of the above permissible limits could result in some hearing loss.
Ear plugs or protectors in the car canals or over the ears must be worn when operating this amplification system in order to prevent a
permanent hearing los:; if exposure U in excess of the limits ns set forth above To ensure against potentially dangerous exposure to high
sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as
this amplification system be protected by hearing protectors while this unit is in operation,
SAVE THESE INSTRUCTIONS!
Advertisement
