Table of Contents
Advertisement
Setting up the system
1OSOVR (En /K)
Making connections to another room (ROOM B) |
connections described below.
FRONT SPEAKERS B connections (1 ):
These connections aliow you to connect the speakers in ROOM
B directly to the receiver
without
using
an additional
power
amplifier. The sound from the main system (ROOM A) automati-
cally switches to stereo when SPEAKERS B are turned on. ~_48.
Monitor TV
Speakers (.2:)
=
Power amp
i
VIDEO
pela
SI
ce
SECOND
RGOM PRE OUT |
ROOM
PRE OUT |
re
lan
©
Oo
m~
AK
SS.
Oey
:
on
S
Vu
=
—
AA
me
p=
=
oe 4a
ope
S
ore
heuer
WE
390
sii
p a t
8
| 33
BEst SIS erees:
at ta
4
tweed
|e
IR
RELAY CONTROL ( 3}
The following connections are only available for models sold
in the U.S.A. and Canada.
RELAY CONTROL (2):
» Gesianed
to operate
external
devices
and
1s
™ tne Xantecn 599-00 Pulse Switching Module or
is Do not exceed maximum current by connecting
Multiple 539-00 modules. Please consult the owner's manual
of the external
device for compatibility
and
installation
instructions
before
attempting
connections
to your
new
receiver. Improper installation, or connection of non-com-
patible equipment, may damage this control output. Please
consult the dealer where the external equipment was pur-
chased or a competent installation specialist for more infor-
mation.
~_57
—
45.
SECOND ROOM PRE OUT connections (.2 ):
Use these connections if you want to enjoy surround sound from
«
your main system (ROOM A) while outputting another source to
©
ROOM
B. Connecting @ speaker cord directly to a SECOND
|
ROOM
PRE OUT jack will not produce any sound from the
speaker. Connect the SECOND ROOM PRE OUT jacks to_pow- .
ered speakers or power amplifiers connected to speakers.
;
/
)
ROOM A
iI
\
oof
(Main System)
\
IR RECEIVER IN (4):
This input lets you connect
an external
IR receiver to enable
remote control of this unit even if It is located in a cabinet or
behind
glass doors
(etc.). The external
IR receiver
works
the
same as the IR receiver located on the front
of this unit. This input
Is compatible with Xantech 291-80. 480-30, 490-30 and similar
models.
— $1.
IR REPEATER OUT (5):
These outputs let you connect
IR repeaters to contro! compo-
nents
located
in cabinets
or behind
glass doors
(etc.). The
repeaters send out signals corresponding to those of the remote
control supplied with the respective equipment. These outputs
are compatible with Xantech 282-00. 286-00, 283-00 and similar
models.
— 57.
The IR REPEATER
OUT terminals may only used when an
external IR receiver is connected to the IR RECEIVER
IN
terminal.
©
Advertisement
Table of Contents
