Download Print this page

Denon DP-67L Operating Instructions Manual page 13

Servo-controlled direct drive turntable system
Hide thumbs Also See for DP-67L:

Advertisement

® Q-damping adjustment (Dynamic Servo Tracer)
Rotate the O-DAMPING knob to the same setting as
the cartridge
stylus force by aligning your setting
with the reference fine.
* Although
the optimum
Q-<damping value differs
according
to
cartridge
compliance,
this
turntable
is designed
so that the recommended
optimum
damping
can
be obtained
by setting the knob to
the same setting as the stylus force. However, if
critical
listening
or
specific
cartridges
require
different Q-damping
settings, this control is fully
adjustable.
HOW
TO PLAY
1. To start piay
{1} Make sure the lifter indicator !amp is off.
{If it is dit, press the fifter (cueing) button and
raise the arm lifter.)
{2} Move the tonearm to the playing position and
press the start button. The turntable will start
to rotate, the arm lifter will be lowered, the
stylus tip will come
in contact with record
and play will begin.
Note:When
lowering the stylus tip onto the
record by hand without using the cueing
device, first press the start button.
2. Cue starting (standby start)
(1) Using the lifter (cueing) botton, first lower the
arm lifter.
Place the stylus tip near the beginning of the
music. You can locate the start of the music
by rotating the turntable by hand.
(3) After finding the beginning of the music,
rotate the turntable backwards 1/2 to 1-1/2
rotations.
{4) When the start button is pressed, the turntable
will start to rotate and play the music at the
selected speed.
(2
~—_—
3. To end play
When the record is finished, the auto lift mechanism
operates. The arm lifter is raised automatically, the
stylus tip is raised from the record surface and the
turntable stops.
4. To stop play anytime (to interrupt play)
Press the STOP button. When the arm lifter rises and
the stylus tip rises from the record surface, after a
slight pause, the stop button Jamp will light and the
turntable will stop.
To raise the stylus tip from the record while the
turntable
is still rotating, simply press the lifter
button. The arm iifter is raised and the stylus tip
will rise from the record surface.
— 33 —
243
ANTI
SKATING
Fig. 17
Abb. 17
Q-DAMPING
Fig. 18
Abb. 18
Canter of gravity
Centre de gravité
Schwerpunkt

Advertisement

loading

This manual is also suitable for:

Dp-72l