Kenwood 106VR Instruction Manual page 30

3B
Audio section
Rated power output at the STEREO operation
50 watts per channel minimum RMS, both channels driven
at 8 12, from 40 Hz to 20,000 Hz with no more than 0.8 %
total harmonic distortion. (FTC)
Power output at the SURROUND operation
Front_
50 watts per channel minimum RMS, both channels driven,
at 8
il.
1 kHz with no more than 0.8 % total harmonic
distortion.
Center_
50 watts minimum RMS at 8 12,1 kHz with no more than
0.8 % total harmonic distortion.
Tuning frequency range. 87.5 MHz - 108 MHz
Usable sensitivity
MONO . 1.3 pV (at 75 12) / 13.2 dBf
(75 kHz dev.. SINAD 30 dB)
50 dB quieting sensitivity
STEREO.31.6 pV (at 75 r>) / 41.2dBf
Total harmonic distortion (1 kHz)
MONO . 0.5 % (65 dBf input)
STEREO. 0.6 % (65 dBf input)
Signal to noise ratio (1 kHz 75 kHz dev.)
MONO . 75 dB (65 dBf input)
STEREO. 68 dB (65 dBf input)
Stereo separationd kHz). 40 dB
Selectivity (IHF ±400 kHz). 66 dB
Frequency response. 30 Hz ~15 kHz, + 0.5 dB, - 3.0 dB
Surround_
50 watts minimum RMS, at 8 12,1 kHz with no more than
0.8 % total harmonic distortion.
Total harmonic distortion.
Signal to noise ratio (IHF'66)
PHONO (MM).
LINE (CD).
Input sensitivity / impedance
PHONO (MM).
CD.
Tone controls
BASS.
MIDDLE .
TREBLE.
N.B. circuit.
0.3 %(1 kHz, 25 W, 812)
. 75 dB
. 94 dB
. 3.0 mV / 47 kl2
. 220 mV / 47 kl2
. ± 8 dB (at 100 Hz)
. ± 8 dB (at 900 Hz)
. ± 8 dB (at 10 kHz)
. + 5 dB (80 Hz)
AM Tunerjsection...
Tuning frequency range. 530 kHz ~ 1,700 kHz
Usable sensitivity (30 % mod., S/N 20 dB)
. 15 pV / (500 pV / m)
Signal to noise ratio (30 % mod., 1 mV input).. 48 dB
General
Power consumption. 180 W
t
AC outlet
SWITCHED. 1: (50 W, 0.42 A max.)
Dimensions....^.W:440 mm (17-5/16")
H:127 mm (5")
D:389mm (15-5/16")
Weight (net). 6.8 kg (15 lb)
1 KENWOOD follows a policy of continuous advancements m development. For this reason specifications may be changed without notice.
2 FuN performance may not be exhib teo in extremely cold locations (below 0 deg Ct.