Kenwood 106VR Instruction Manual page 28

A
Caution: Read this page carefully to ensure safe operation.
106Vfl/1Q5VR (En)
Audio secf/on
Rated power output at the STEREO operation
no watts per channel minimum RMS, both channels
driven at 8 O, from 40 Hz to 20,000 Hz with no more than
0.8 % total harmonic distortion. (FTC)
Power output at the SURROUND operation
Front
Surround
110 watts per channel minimum RMS, at 8
Li,
1 kHz with
no more than 0.8 % total harmonic distortion.
Total harmonic distortion. 0.3 % (1 kHz, 55 W, 8 £i)
Signal to noise ratio (IHF'66)
PHONO IMM). 75 dB
line (CD). 93 dB
Input sensitivity / impedance
PHONO (MM). 3.0 mV/47 kn
CD. 220 mV / 47 k£i
Tone controls
BASS. a: 8 dB (at 100 Hz)
middle. t 8 dB (at 900 Hz)
1'RBBLE. t 8 dB (at 10 kHz)
N.B. circuit. + 5 dB (80 Hz)
Output level / impedance
Sub woofer preout .2.0 V / 600 £2
Video sectipij
VIDEO inputs / outputs (Composite). 1 Vp-p / 75
£2
/^.Ti/nersec^^
Tuning frequency range. 87.5 MHz ~ 108 MHz
Usable sensitivity
mono. 1.3 pV (at 75 £2) / 13.2 dBf
(75 kHz dev., SINAD 30 dB)
50 dB quieting sensitivity
STEREO.31.6 pV (at 75 £2) / 41.2dBf
Total harmonic distortion (1 kHz)
mono. 0.5 % (65 dBf input)
STEREO.. 0.6 % (65 dBf input)
Signal to noise ratio (1 kHz 75 kHz dev.)
mono. 75 dB (65 dBf input)
STEREO. 68 dB (65 dBf Input)
Stereo separation (1 kHz). 40 dB
Selectivity (IHF ±400 kHz). 66 dB
Frequency response. 30 Hz -15 kHz. + 0.5 dB, - 3.0 dB
.
Tuning frequency range. 530 kHz - 1,700 kHz
Usable sensitivity (30 % mod., S/N 20 dB)
. 15 pV / (500 pV / m)
Signal to noise ratio (30 % mod., 1 mV input). 48 dB
.
Power consumption. 2.8 A
ZL AC outlet
SWITCHED. 1: (50 W, 0.42 A max.)
Dimensions.W:440 mm (17-5/16")
H:127 mm (5")
D;389 mm (15-5/16")
Weight (net) . 9.O kg (19.9 lb)
1 KENWOOD follows a policy of continuous advancements m development For this reason specifications may be changed without notice
2, Full performance may not be exhibited m extremely cold locations (below 0 deg C).