Controls And Instruments - BOMBARDIER ski-doo Alpine 1972 Owner's Manual

CONTROLS
&
INSTRUMENTS
B - - -
H---
J
E
(A) Throttle lever
(B) Brake lever
(C) Ignition switch
(D) light switch
(E) Choke knob
2
- - - A
- - - D
---c
---G
F
(F) Manual starter
(G) Gear shift lever
(H) lighter (Valmont 440ER)
(J) Tachometer (Valmont only)
(K) Handlebar
TOOL KIT AND USES
As standard equipment, Bombardier
equips each new Ski-Doo snowmobile
with the fol!owing tools:
Screwdriver
Use for Carburetor
Pivntirlfl
to pry off Taillight lens;
Case Access Covers: etc.
Box Wrench (22126mm)
Use 22mm end
to
remove and
ror.l",,,·,,,
"W" type Spark Plug, 26mm end for
type Spark Plug.
Box Wrench (11/13mm)
Use 11mm end to remove Air
S!l(~nCler
(Skandic* Mode!). Use 13mm end
gine Head Nuts. Transmission Gear Box
Nuts (Alpine/Vaimont only).
Pin (8 x 130mm)
Use as handle for Box Wrench.
Open End Wrench (11113mm)
Use 11mm end for Carburetor Studs
(Skandic* Model only). Use 13mm end
for left side Carburetor Flange Nut, left
side Muffler Flange Nut (single cylinder
models only).
Angular Wrench (10/13mm)
Use 10mm end for Rewind Starter Unit
bolts. Use 13mm end for right side Car-
buretor and/or Muffler Flange Nuts.