Spare Parts - WAGNER W 590 Manual

W 590 Flexio
1) Press both locks (Fig. 22, 1) and remove the filter cover.
2) Remove the air filter (2) and replace depending on contamination.
3) Click the filter cover in place again.
Ventilating hose / Valve
1) Pull the ventilating hose (Fig. 15, 1) at the top from the gun body. Screw off the valve
cover (2). Remove the diaphragm (3). Carefully clean all parts or replace in the
event of damage.
2) Place the diaphragm (Fig. 15, 3) with the pin facing upwards on the bottom section
of the valve. Also see the marking on the gun body.
3) Place on the valve cover (Fig. 15, 2) and screw it closed.
4) Place the ventilating hose (Fig. 15, 1) on the valve cover and on the nipple at the gun
body.

22. Spare Parts

Spare Parts List Wall Extra I-Spray spray attachment (Fig. 23)
Pos. Designation
Wall Extra I-Spray spray attachment complete with 1300 ml
container
1 Air cap
2 Union nut and nozzle
3 O-ring of spray attachment
4 Ventilating hose, valve cover, diaphragm
5 Suction tube
6 Container seal
7 Container with cover 1300 ml (only for Wall Extra I-Spray spray
attachment)
Spare Parts List Standard spray attachment (Fig. 24)
Pos. Designation
Standard spray attachment complete with 800 ml container
1 Union nut
2 Air cap
3 Nozzle
4 Nozzle seal
5 O-ring of spray attachment
6 Ventilating hose, valve cover, diaphragm
7 Suction tube (no marking or R)*
Suction tube (marking AR or AU)*
8 Container seal (no marking or R)*
Container seal (marking AR or AU)*
EN
Order No.
2361 746
2382 753
2382 751
2362 875
2382 754
2389 021
2389 023
2305 155
Order No.
2361 730
2362 873
2362 877
2362 878
0417 706
2362 875
2304 027
2362 876
2367 410
2323 039
2370 527
33