Sinclair SDV5 User & Installation Manual page 19

Full dc inverter systems

Hide thumbs Also See for SDV5:

2-1: Using a Network Cable

Only when the following conditions are met, can the user configures the CCM15 via a

network cable:

The CCM15 must access a wireless router.

The smart phone and CCM15 must be located in one network segment and

connected to one wireless router.

The wireless router must access the Internet.

Select a configuration manner.

The App will search for the

of each

CCM15

devices found. Only one

Select one, and the system counts down. After configuration succeeds, it goes to the

main interface for displaying devices.

CCM15

gateway. As shown in the figure above,

CCM15

devices on its LAN and displays the IP address

device can be selected for configuration.

displays multiple

Table of Contents