Table of Contents
Advertisement
Laundry
label
To avoid an automatic switch off while the iron is heating
up, always keep the iron on its heel.
Start at a low temperature and graduate to a high tem-
perature.
For delicate fabrics we recommend carrying out a test on
an unobstrusive part of the garment (inner seam).
Steam can only be produced when the thermostat is in
the red cotton/linen zone.
SETTING VARIABLE STEAM CONTROL
4
ma x C l e a n
m i n
Iron ready for steam ironing
Steam is produced as soon as the iron is held horizontally and
variable steam lever is moved from the min position.
Steam off
Steam generation can be interrupted by standing the iron on
its heel or sliding the variable steam control fully to the left
(min).
ANTI-DRIP SYSTEM
(Depending on model)
In order to produce steam, all irons require a high tempera-
ture. If the soleplate is not hot enough some of the water will
not turn to steam and can spit or leak from the soleplate. The
new anti-drip system automatically reduces the volume of
steam when ironing at low temperatures to prevent dripping.
SPRAY SETTING
5
Fabric
Synthetics
Viscose
Polyester
Silk
Wool
Cotton
Linen
Set the variable steam control to
required steam volume. Steam can
only be produced when the ther-
mostat is aligned to
on dial). (If on setting
variable steam lever should be shut
off.) Allow iron to heat up (light
S e l f
goes out) before activating the vari-
able steam control.
Ensure there is water in the tank.
Moistening the fabric with the spray
will make wrinkle removal easier.
This is very useful when the three
dot setting is too hot for the materi-
al being ironed.
Press the spray button down slowly
for a jet or quicklyfor a mist.
Do not spray silk, etc.
Temperature
setting
l
(low temperature)
l l
(medium temperature)
l l l
(high temperature)
l l l
l
(red zone
l l
or
the
Advertisement
Table of Contents
