Philips 180P2M199 User Manual page 42

Troubleshooting
The screen is too bright or too dark
An after-image appears
An after-image remains after the power
has been turned off.
Green, red, blue, dark, and white dots
remains
For further assistance, refer to the
file:///D|/Grace/K1/english/180p2m/safety/saf_troub.htm (2 of 2) [11/22/2001 1:47:36 PM]
Adjust the contrast and brightness in OSD Main Controls. (The
backlight of the LCD monitor has a fixed life span. When the screen
becomes dark or begins to flicker, please contact your dealer.
If an image remains in the screen for an extended period of time, it
may be imprinted in the screen and leave an after-image. This
usually disappears after a few hours
This is characteristic of liquid crystal and is not caused by a
malfunction or deterioration of the liquid crystal. The after-image will
disappear after a set amount of time
The remaining dots are normal characteristic of the liquid crystal
used in today's technology.
Consumer Information Centers
RETURN TO TOP OF THE PAGE
list to contact your local Philips distributor.