Toro 161-4450 Manual page 4

Assembling the Assist
Handle
1. Assemble the grooved pin through the hole in
the assist handle as shown in
1. Assist handle
2. Washer (3/8 inch)
2. Secure the pin to the handle with the washer
(3/8 inch) and the retaining ring
Figure 1.
Figure 1
3. Retaining ring
4. Pin (grooved)
(Figure
Installing the Assist-Handle
Bracket
Measuring and Drilling Holes into
the Frame Rail
1. Hold the assist-handle bracket against the
left frame rail and position it according to the
measurement for your particular model
2).
g464941
1).
A: TimeCutter models. B: Titan models.
1. Assist-handle bracket
2. Left frame rail
2. Using the assist-handle bracket as a template,
draw marks through the holes onto the frame
rail (Figure
2
Figure 2
3. 113 mm (4-7/16 inches)
4. 146 mm (5-3/4 inches)
3).
(Figure
g464996