Replacing The Batteries; Maintenance; Cleaning And Storage - Profile 446002001 Manual

Bladeless fan
446002001
TIMER button
Press to start the timer function. Each press will increase the timer by 0.5 hours. The timer function
can be set between 0.5 and 7.5 hours. The set time will be displayed on the unit.
SWING button
Press to start the oscillation function. The light will turn on. Press the button again to turn off the
oscillation function.

REPLACING THE BATTERIES

The remote control is powered by a Lithium Button Cell Battery (CR2025). Should the remote
become unresponsive, replace the battery following the instructions below:
1. Turn over the remote and press tab A to the right.
2. Slide out the battery tray B.
3. Replace the battery with the same type, ensuring the positive side is facing upwards.

MAINTENANCE

ATTENTION: Turn off the unit and unplug from the outlet before cleaning or before performing any
maintenance.

CLEANING AND STORAGE

• Clean the fan with a duster or a soft cloth.
• Never use chemical solvents as they may cause serious damage to the unit. Ensure no
water enters the control panel or the fan motor.
• Do not use the unit until it is completely dry.
• For storage, place the fan in its original box or cover the fan to protect it from dust.
• Store in a cool dry place.
Profile, Pachtgoedstraat 2, 9140 Temse, Belgium
EN - 5