On-Screen Display (Osd); Vcr Status & Clock Display; Channel & Function Display; Displays - Panasonic Omnivision PV-M1339 Operating Instructions Manual

On-Screen Displays (OSD)
VCR Status & Clock Display Channel & Function Display
DISPLAY To display or remove When a function button is pressed (PLAY,
the overlay. FF, etc.) or you change channels, the
C Combination VCR mode or channel number
Press DISPLAY. will be displayed.
(Some station names may also appear if
Channel Caption is set. See pages 22, 23.)
Function Status — Current time Channel Caption 08
Hec Time
e HEC = 12:00PM ABC
Remaining :25 -0:12:34 Counter
(OTR mode SP
only see
page 11.)
12/27/1999 MON
12:00PM - 1:00PM
CH 08 ABC MOVIE :
MEMORIAL MOVIE Blue Screen Display
Time Stamp Data. Tape Speed Whenever a blank section of a tape comes
(See pages 24, 25.) up in Play mode, or when the selected
channel has no broadcast signal with the
"Weak Signal Display ON/OFF" (page 26)
set to "OFF," the TV screen will turn solid
blue.
These displays will alert you of a missed
Wa rn i n g an d | n stru ct i on D i S p lays operation or provide further instructions.
| OSD — | Caution [Po] OSD | Caution [Pg]
NO CH FOUND If no active channels NO CASSETTE If you press PLAY, FF,
PLEASE CHECK ANTENNA are found for PLEASE INSERT A CASsETTE | REW, or REC on the
CABLE CONNECTION THEN. | CHANNEL remote control or the
MEMORY... i Combination VCR without
a cassette inserted...
PUSH CH UP KEY AGAIN
If you attempt to set or If the Combination VCR is
A MÍ a Timer not in Stop mode or a
BEFORE PROGRAMMING
Recording or set the
cassette with record tab is
On-Timer and the not inserted two minutes
Clock is not set... PLEASE PREPARE before a Timer Recording
FOR TIMER REC is about to begin...
If you press REC on VIDEO HEADS MAY
the remote control or NEPO nsa nko
RECORD TAB nati
the Combination VCR, CLEANING CASSETTE
and a cassette is OR REFER TO MANUAL
inserted with no record
tab...
if head cleaning becomes
necessary while playing
back a tape...
CHECK CASSETTE
END: PLAY KEY
If you press a function
button other than
STOP/EJECT or POWER
while the Combination
VCR is in VCR Lock
mode...
TO CANCEL TIMER REC
HOLD DOWN STOP KEY
FOR APPROX 3 SEC
If you press STOP
during a Timer
Recording...
VCR LOCK ACTIVATED
uon 1nOA 1404