On-Timer With Alarm; Sleep Timer - Panasonic Omnivision PV-M1339 Operating Instructions Manual

TV Timer Features
ON-TIMER with Alarm M check list before you begin.
Combination VCR can be set to automatically power on in one L] The clock is set to correct time.
of 2 modes (TV or Playback.) You can also combine the On-
Timer with a one minute alarm that gradually increases in volume.
select.
2) Press P to set.
* Make sure a tape is
inserted if Playback
mode is selected.
Model PV-M2039 unit is shown here.
SELECT HOUH
SELECT :à Y KEY
SET ¡> KEY
ENO :ON-TIMER KEY
ON TIMER Set Alarm.
6:00AM CH08 E AR
ALAS ecc ABO LLL select "ON" or ON TIMER Indicator
"OFF."
CANCEL : ADD/DLT KEY
SELECT:4 Y KEY
SET :4 > KEY
END :ON-TIMER KEY
When "ON" is selected,
an alarm will gradually increase in volume for one minute or
until cancelled by pressing any button (including VOL «b» .)
To Make Corrections,
use AY and <P to move back and correct as necessary.
SELECT/
UA 2 SET
å :CH UP
Y :CH DOWN
P VOLUP
4:VOL DOWN
e MÀ — —— — — MÀ ——
AR Set ON TIMER.
O) Press ON-TIMER.
* ON TIMER indicator lights on the
Combination VCR.
To cancel ON-TIMER set,
press ON-TIMER to redisplay the screen in step 3. Then, press
ADD/DLT to clear the time ("6" is flashing.) Now, press ON-TIMER
to end. "ON TIMER END" appears on-screen for a few seconds.
If no button on the remote or Combination VCR (including a button
used to turn off the alarm) is pressed within 60 minutes after
Combination VCR turns itself on, it will turn itself back off.
SLEEP TIMER
Combination VCR can be set for auto power off.
Set SLEEP TIMER.
Press SLEEP repeatedly.
SLEEP | + Pressing DISPLAY with sleep
timer set displays remaining time.
To Cancel, press SLEEP
repeatedly until "SLEEP TIMER
00" appears.
SLEEP TIMER 30
SLEEP TIMER 60
SLEEP TIMER 90
SLEEP TIMER 00
14 For assistance, call 1-800-211-PANA(7262)