Advertisement
Troubleshooting:
Lights Turn On for Unknown Reasons
1. Lights may tum on during rain,
2. You may not be aware that
snow and windstorms because the
animals have triggered the sensor.
sensor will detect large changes in
Check sensor aiming to reduce
temperature. Do not mount sensor
nuisance triggering.
in unprotected area.
3. The sensor may turn on during
Problem: Sensor turns on during
voltage surges. Reset by turning
storms.
power off for at least 1 0 seconds.
4. A possible source of "mysterious"
sensor activations is the sensor
receiving strong local radio signals.
Check for nearby CB, Ham, VHF
radio transmitters or Cellular tele
phones, the sensor will not be per
manently impaired by these signals.
5. Check all the Solutions
mentioned under "Lights Turn On
Solution: Mount sensor in protected
and Off".
area.
Extreme weather note:
This is a passive infrared sensor
that detects changes in temperature.
Dramatic changes in temperature can
a:::company snowstorms, w ind and
rain storms and sudden changes in
ambient temperature. Passive infrared
sensors, like the Luminator, may
detect these changes and activate
the lights. After the severe weather
has stopped the sensor will reset itself
to normal operation.
Limited Warranty
Most difficulties with the Luminator can
Your Luminator will be replaced or
repaired, at our option, if it proves
be solved with a simple adjustment. If
to be defective in workmanship or
you are having a problem with your
materials within three years from
unit, please do the following:
the date of original purchase.
1. Re-read the Troubleshooting
For repair or replacement, return the
section in this manual.
product freight prepaid and insured to
the address below. The unit should
2. Call our Tech Help Line, and we
be packed carefully. Please include
will offer suggestions to help you
your sales receipt and a description
with the problem. Before you call,
of the problem.
please have this information handy:
If the unit is out of warranty or the
a) Catalog number of your unit
damage is unrelated to the original
b) Wattage connected to the
manufacture, return your unit directly
sensor
to us with a check for $1 5.00 (made
c) Serial Number
out to RAB Electric). We will repair
d) This Installation Manual
or replace your unit.
Under no circumstances shall we
be liable for any incidental or conse
quential damages arising out of or
in connection with the use or perlor
mance of this product or other indirect
damages with respect to loss of
property or revenue or cost of instal
lation, removal or re-installation. This
warranty gives you specific legal
rights and you may also have other
rights which vary from state to state.
Easy Installation & Product Help
Fax Back
Tech Help Line
Faxed Tips & Specs,
Call our friendly experts.
24 hours/day.
BAM - 5PM ET Mon. - Fri.
888 RAB-1236
888 RAB-1000
www.rabweb.com
e-mail
Visit our internet site for
Your questions and requests
color product photos
will be answered promptly.
and installation tips.
tech@rabweb.com
RAB Electric Manufacturin g Inc.
Advertisement
