Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for KlinMak MINI 1240
Summary of Contents for KlinMak MINI 1240
- Page 1 MINI 1240 UK INSTRUCTION MANUAL...
- Page 2 INSTRUCTION MANUAL • Description: Walk-behind scrubber dryer for use in commercial/industrial premises • Model: MINI 1240 • Manual revision: 00 In order to obtain the best results, it is recommended to use original consumables The brands or registered trademarks mentioned in this manual belong to their respective owners.
-
Page 3: Table Of Contents
MINI 1240 Owner's Manual TABLE OF CONTENTS MACHINE DESCRIPTION 1.1. Control panel description TECHNICAL SPECIFICATIONS 2.1. Functional units SAFETY FEATURES 3.1. Declaration of absence of harmful substances 3.2. Safety devices for fixed closing guards 3.3. Safety devices for movable guards... - Page 4 MINI 1240 Owner's Manual CONTROL STATION 13.1 CONTROL STATION 13.1.1 Key switch 0/1 13.1.2 Brush rotation activation switch 13.1.3 Suction activation switch 13.1.4 Water dispensing switch 13.1.5 Battery Charge Status Indicator 13.1.6 Counter 13.2 CHECKS 13.2.1 Neutrik connector socket for battery charging 13.3...
- Page 5 Thank you for choosing to purchase the new MINI 1240 walk-behind floor scrubber-dryer whose features described in this manual will surely will meet all your needs. MINI 1240 has been entirely designed and built completely in line with the Machinery Directive 2006/42/EC (implemented with Italian Legislative Decree 17/10), the Low Voltage Directive 2014/35/EC, Electromagnetic Compatibility 2014/30/EC, with top quality materials and a particular commitment to reduce the risk of accidents as much as possible.
-
Page 6: Machine Description
MINI 1240 Owner's Manual MACHINE DESCRIPTION MINI 1240 is a walk-behind battery-powered Scrubber-Drying machine for washing and drying hard floors intended for commercial use. The main systems of the machine are as follows: ▪ The cleaning solution tank and its circuit, ▪... - Page 7 MINI 1240 Owner's Manual The control devices are designed to control the various machine settings. They include: 1. Start-up commands 2. Display 3. Solenoid valve button 4. Brush button 5. Suction button 6. Emergency pushbutton Revision 0.0 Translation of the original instructions...
-
Page 8: Control Panel Description
MINI 1240 Owner's Manual 1. Control panel description Start-up commands Press either the right or left red button on the handle to start the machine. CAUTION: when the machine is switched on, the red lever must NOT be pressed, otherwise the RELEASE RED... -
Page 9: Technical Specifications
MINI 1240 Owner's Manual TECHNICAL SPECIFICATIONS Description Note MINI 1240 Voltage 54.6 Volt Solution/recovery tank capacity 12 / 14 L Expected hourly coverage 1600 sqm/h Length 750 mm Width with squeegee 490 mm Height Open handle 1100 mm Protection rating... -
Page 10: Functional Units
MINI 1240 Owner's Manual 2.1 Functional units LIST OF UNITS Squeege Control panel Vacuum motor (turbine) Solution tank Battery compartment Recovery tank Turbine exhaust air filter Recovery tank lid Brush rotation motor Recovery tank drain hose Water loading inlet Brush head... -
Page 11: Safety Features
MINI 1240 Owner's Manual Tank view Water loading inlet Dirty water inlet Lid with gasket from squeegee Lid closing hinge 3. SAFETY FEATURES In view of the safety standards of the consolidated text of the Machinery Directive 2006/42/EC (implemented with Italian Legislative Decree 17/10), the Low Voltage Directive 2014/35/EC, Electromagnetic Compatibility 2014/30/EC. - Page 12 MINI 1240 Owner's Manual • Before transferring the machine to a waste collection centre, the battery must be removed and disposed of correctly. • Check that all warning labels are legible and correctly applied to the machine. • During operation, pay the utmost attention to other people, especially children.
-
Page 13: Declaration Of Absence Of Harmful Substances
MINI 1240 Owner's Manual 3.1 Declaration of absence of harmful substances We declare that our products, used during machine assembly, are manufactured with materials that comply with the limits established by the current regulations on safeguarding health and protecting the environment and do not contain substances classified as SVHC (Substance of Very High Concern) in accordance with EC Regulation 1907/2006 (REACH, Registration, Evaluation, Authorisation and Restriction of Chemical substances). -
Page 14: Intended Use Of The
6. INTENDED USE OF THE MACHINE (Washing and drying phase) MINI 1240 is a walk-behind battery-powered Scrubber-Drying machine for washing and drying hard floors intended for commercial use. The machine applies a cleaning solution from its tank to the floor; a tube brings it to the brush plate, with manually adjustable flow rate with lever selector;... -
Page 15: Kit Supplied
MINI 1240 Owner's Manual WARNING The machine is designed to work on flat surfaces and gentle slopes. The maximum slope allowed, which can be driven uphill both during the work phase and during the transfer phase, is 2%. Use the machine in reverse to go down a slope. -
Page 16: Machine Preparation And Commissioning
MINI 1240 Owner's Manual 11. MACHINE PREPARATION AND COMMISSIONING 11.1 Machine start-up NOTE: Carry out a preliminary inspection before operating the machine. FOR SAFETY: Before starting the machine, make sure that the emergency on the back of the machine is not pressed. -
Page 17: Machine Use
MINI 1240 Owner's Manual 12. USE OF THE MACHINE 12.1 Floor washing and drying Plan the washing and drying route in advance. The longest route is that which follows the perimeter of the area to be treated. The ideal route is that with the fewest turns, stops or lifting and lowering of the brush plate (for manoeuvring). -
Page 18: Emptying And Cleaning The Recovery Tank
MINI 1240 Owner's Manual 12.4 Emptying and cleaning the recovery tank 1. Place the machine near a drainage system on the floor drain. The drain hose (1) is located to the rear area of the machine. 2. Remove the drain hose from the hook. Open the cap and lower the drain hose in the direction of the drainage system on the floor. -
Page 19: Control Station
MINI 1240 Owner's Manual 13. CONTROL STATION 13.1 CONTROL STATION 1. Start-up commands 2. Display 3. Solenoid valve solution button 4. Brush button 5. Suction button 6. Start Key – Emergency pushbutton 13.1.1 Key switch (6) There is a key on the emergency mushroom-shaped button to be disconnected after activating the emergency for the machine lock. -
Page 20: Checks
MINI 1240 Owner's Manual 13.2 CHECKS We recommend cleaning the squeegee after each work cycle: remove it from the connection by unscrewing the locking knobs, unhook the pipe and clean under running water. Cleaning the water filter: it is positioned at the rear. Close the valve, unscrew the cap and clean the internal mesh. -
Page 21: Charging The Batteries
MINI 1240 Owner's Manual Instructions for proper maintenance Maintenance - Recharge within 6 months. Recommended 3 months. - Store at a temperature between 5 and 30 °C, in the original packaging. Main rules and precautions for use - Protect the battery from possible impacts and mechanical and thermal shocks... -
Page 22: Replacing The Brushes
MINI 1240 Owner's Manual 13.5 Replacing the brushes How to replace the brushes: 1. Tilt the machine CAUTION: Operation to be carried out with the recovery tank empty 2. Pull the brush using the handle at the centre of the brush (1) 3. -
Page 23: Replacing The Squeegee Drying Blades
MINI 1240 Owner's Manual 13.8 Replacing the squeegee drying blades Two blades are fitted: one front and one rear, different from each other. They are shaped in such a way as to avoid fitting errors. The squeegee has the function of collecting water from the floor, through a vacuum chamber that is generated inside it. -
Page 24: Maintenance Schedule
MINI 1240 Owner's Manual 13.10 Maintenance Schedule every 50 every 200 Maintenance to be performed daily hours hours Check recovery tank lid gaskets. Visually check if the wheels are damaged or worn. Check that the brushes are fitted correctly. Check the connections of the vacuum hoses. -
Page 25: Troubleshooting
MINI 1240 Owner's Manual 13.12 Troubleshooting PROBLEM CAUSE SOLUTION Emergency button pressed Check the button Machine without power Power cables disconnected Check connections. supply Low battery See display Worn brushes Check for wear No forward thrust or poor forward thrust. -
Page 26: Sound Emissions
MINI 1240 Owner's Manual 14. Sound emission The equivalent level averaged over multiple Leq working cycles was measured with a Class1 precision sound level meter, as defined in the I.E.C. standards with a fast-slow reading constant, both from the position in which the operator is located and in positions surrounding the machine under consideration. -
Page 27: Declaration Of Conformity
EN 60335-1; EN 60335-2-72 Modello – Model – Modéle – Modell – Modelo – Malli – Mudel – Modelis: ❑ MINI 1240 Matricola - Serial n° - Matricule – Maschinennummer – Matricula – Serienummer – Sarjanumero – Registratienummer – Vyrobne cislo – Sorozatszàm-Vyrobnì – Seeria nr – Serijos nr – Serijska stevilka – Nr seryjny – Serijos Nr.: N°... - Page 28 KlinMak Srl 20084 Lacchiarella (MI) - Italy - Via della Levata 1 -Tel. +39-02-8929291 Email: info@klinmak.com www.klinmak.com Partner:...
Need help?
Do you have a question about the MINI 1240 and is the answer not in the manual?
Questions and answers