1. Manuals
  2. Brands
  3. Stoneridge Manuals
  4. Automobile Accessories
  5. SE5000-8.1
  6. Manual

Stoneridge SE5000-8.1 Manual

Smart tachograph
Hide thumbs Also See for SE5000-8.1:
Table of Contents

Advertisement

Quick Links

Download this manual
 
Driver & Company Manual
SE5000-8.1 Smart Tachograph
STONERIDGE - EVERY ANGLE COVERED
www.stoneridgeelectronics.com
www.se5000.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SE5000-8.1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Stoneridge SE5000-8.1

Summary of Contents for Stoneridge SE5000-8.1

  • Page 1   Driver & Company Manual SE5000-8.1 Smart Tachograph STONERIDGE - EVERY ANGLE COVERED www.stoneridgeelectronics.com www.se5000.com...

  • Page 3: Welcome

    Welcome whole or in part, without written Welcome   Driver Part with information for permission from Stoneridge Electronics Thank you for choosing the SE5000-8.1 the driver. Stoneridge Smart Tachograph.   Company Part with information for the company owning the vehicle.

  • Page 4: Other Documents

    Note! there will be a security ink section The tampered label in the image above   On the right-hand side Stoneridge is missing the security ink on the right Electronics AB and a data matrix side of the label. code (contains the serial number of...
  • Page 5   Workshop Manual - Contains information for certified smart tachograph workshops. This information is only handed out to workshops qualified by Stoneridge training program.   Control Manual - Contains information for control officers on how to carry out controls on the...

  • Page 6: Table Of Contents

    Contents Time Left Driving Menus Driver Part Warning and Pre-warning How are Activities Registered? 13 The SE5000-8.1 Smart Tachograph 8 Taking a Break Manually Registered Activities 13 Card Trays Towards the End of the Day Before you Start Driving Printer Panel...
  • Page 7 Contents DDS Calculations and Local time function Company Inspection Limitations Drivers Consent to Export Keep a Record Driver Timer Display (DTD) Personal Data Inspection Fails Period of Availability (POA) Invert Colours on the Display Workshop Inspection In DDS calculations View Vehicle Registration Lock-in/Lock-out Data Number In WTD calculations...
  • Page 8 (VRN) Technical Data (1/2) The ATEX Tachograph Begin and End place Technical Data (2/2) Visible Differences DDS Settings Overspeeding Contact Stoneridge Table with all DDS Settings Vehicle Speed Index DDS Displays Engine Speed (rpm) WTD Settings Status D1/D2 Reference Part...

  • Page 9: Driver Part

    Driver Part Driver Part The Driver Part contains the following:   SE5000-8.1 Smart Tachograph- a presentation on what you can see on the SE5000-8.1 Smart Tachograph, the card tray, printer panel, buttons and the different displays. Finally, information on how activities are registered is given.

  • Page 10: The Se5000-8.1 Smart Tachograph

    Driver Part The SE5000-8.1 Smart Card Trays Printer Panel Tachograph This is a brief presentation of what you can see of the tachograph. The illustration below shows what can be seen when you e.g. enter the vehicle and touch any key on the tachograph.

  • Page 11: Buttons

    Driver Part The display is, like any other display unit, used in many different ways: Buttons DSRC   Basically the display is used to show The DSRC, is a unit that is separate from Back Moves back in a menu information.

  • Page 12: Dashboard Integration

    Driver Part     DDS OFF (Driver Decision Driver 2. Dashboard Integration   UTC Date and Time. Support OFF.   Local Date and Time. Some vehicles can display some of the   Driver Timer Display (DTD) * Tachograph information on an integrated Display Views in DDS ON  ...

  • Page 13: Current Speed

    Driver Part  5. Operating mode of tachograph.  4. Drive time available after this Time Left Driving Operational mode is automatically break/rest. entered when no card is inserted or Driver 1 and Driver 2 when a driver card is inserted in the tachograph.

  • Page 14: Local Date And Time

    Driver Part  1. Date.  1. Indicate that driver Ferry/Train  2. UTC time. information is shown.  3. Year.  2. Working time since last break.  4. Indicates that it is UTC time that is  3. Daily working time. used.  4. Daily break time.  5.

  • Page 15: Menus

    Driver Part Work While working when the co-driver) repeatedly until the vehicle is standing still, for Menus desired activity is displayed. Driving example when loading the is always selected automatically and There are four main menus in the display, vehicle. cannot be changed.

  • Page 16: Before You Start Driving

    Driver Part  5. Select the End country for your  3. Close the tray by pushing it carefully previous shift and press OK. The forward. Before you Start Driving display will show: The following scenario describes a normal Begin country working day with a single driver where:  6.

  • Page 17: At The End Of The Day

    Driver Part tachograph and if you change vehicle you   When the vehicle is in motion. must bring your card with you to the other Eject (Withdraw) Driver Card   While the tachograph is busy vehicle. The card fits into all smart processing a driver card.

  • Page 18: Begin And End Places

    Driver Part Note! If the function to automatically suggest Begin/End place is activated, you can use It is strongly recommended that the Manually register Begin and End it as described below. cards are handled in following Place sequence: At withdraw: First withdraw driver's card You can register the places at any time Begin Place in slot 1 and wait until card is ejected.

  • Page 19: At Card Insertion

    Driver Part Note!   From 18:00 over the weekend Any place/country registration will be until 08:00 Monday 21/3: You stored on both cards if there are two rested. valid cards inserted.   From 08:00 to 08:40: You were available. At Card Insertion  ...
  • Page 20 Driver Part  10. Press OK again to confirm. The display You will now register the time when you 18/03 were available. will show the date and time when the 15:23 other work was finished together with:  18. Highlight the available symbol  5.

  • Page 21: Change A Manual Entry

    Driver Part  24. The time between the last activity Clear all entries (unaccounted time) and the time when Change a Manual Entry the card was inserted is displayed,  6. Press OK and register new entries You can go back and change your manual which is correct).

  • Page 22: Border Crossing

    Driver Part  1. With the Card still in the tachograph press the (1/2) button shortly. If you are the driver you must use the (1) button and if you are a co-driver you must use the (2) button.  2. Press again shortly until you have the right symbol displayed.

  • Page 23: Working Time Directive (Wtd)

    4 29 (WTD) 45’ Assume that you start driving in the This version of the Stoneridge Smart morning at e.g. at 7 in the morning. In the Tachograph supports the EU Working illustration below you insert the card and Time Directive (2002/15/EC).

  • Page 24: Taking A Break

    Driver Part  1. Pre-warning - will be shown 15 minutes  4. You can drive 4 hours and 30 minutes  3. Icon showing the next required activity before Time Left Driving has elapsed. when you have finished your rest. will be the Daily Rest.  2.

  • Page 25: Calendar Time Limit

    Driver Part conjunction with travelling by ferry or train there is a possibility to interrupt the Calendar Time Limit Activate Ferry/Train condition rest twice to embark and disembark the ferry or train. For DDS to calculate the The drive time left view will show this To activate the ferry/train condition rest correctly enter Ferry/Train special when the next activity required will be a...

  • Page 26: Driving Out Of Scope

    Driver Part Note!  4. Press OK. End Ferry/train? We recommend not to remove the card  4. Press OK to confirm. The Ferry/train   If you turned the out of scope mode from the tachograph during the daily rest activity is deactivated. on, the Default Display View will while utilizing the ferry/train condition.

  • Page 27: More On Time Left Driving

    Driver Part The following pictogram can be shown in If a pictogram (2) is shown, it has the  3. Press OK and select: position (1) and have the following following meaning: Load/Unload meaning:  4. Press OK. A daily rest must start  5.

  • Page 28: Period Of Availability (Poa)

    Driver Part The DTD works without a driver card Function is active and current activity is Function is active and current activity is inserted. It is also not affected by ejecting work. Work activity will not affect the Availability. Rest and Availability will the driver card as the timers are based on timers.

  • Page 29: In Wtd Calculations

    Driver Part  3. The command can be toggled between  3. Press OK.   Calendar Time Left to Rest. Now, you can use the arrow buttons to YES (POA calculated as break) and   Accumulated Driving Time Driver move between the different views. NO (POA not calculated as break).

  • Page 30: Driver

    Driver Part  1. Driver 1 (there is a similar display for Product and certification GNSS Positioning driver 2).  2. Continuous Driving Time.  3. Cumulated Weekly Driving Time.  4. Cumulated Daily Driving Time.  15/12 21:30:23  5. Cumulated 2-Week Driving Time. 018º01.0 59º22.2 Time to Download and Calibrate  1.

  • Page 31: Company Locked In

    Driver Part printouts, but you can change which  1. DSRC pictogram Company Locked in language is to be used.  2. DSRC extended serial number  3. DSRC certification number If you change language, the new language will be saved only in the tachograph, not on the driver card.

  • Page 32: Local Time Function

    Driver Part DDS Settings  4. Press OK and select: Change Local Time Daylight Saving Time DDS enable Note! In EU countries, the last Sunday in March  5. Select OFF to disable the DDS and October the tachograph will remind This menu option is not available if Local presentation.

  • Page 33: Drivers Consent To Export

    Driver Part Note!  5. Change the setting, using the arrow buttons. When the ALTA option is selected, the Invert Colours on the Display  6. Press OK to confirm. The local time local time menu will not be available. The function to change local time via There are two modes for the display: dark function is changed.

  • Page 34: Enable The Bluetooth Function

    Driver Part This Driver consent can later be changed  1. Press OK to show the menu. Reg. Number via the menus in the tachograph.  2. Select:  4. Press OK to confirm. The vehicle SETTINGS To use the RHMI functions each driver registration number is displayed.

  • Page 35: Connect To An Already Paired

    Driver Part 09h05 09h05 tachograph and wish to connect to an  6. Press OK to allow for a device to be  09h05 06:50 already paired device, follow below steps: paired (will timeout after 300sec). You can abort the pairing process by  1.

  • Page 36: Remove All Paired Devices (Its)

    Driver Part  6. Press OK. Paired devices  7. If two cards are inserted, select the Allow RHMI card you want and press OK. Each driver of the currently inserted cards Remove all paired devices (ITS)  8. When Slot number with Allow RHMI needs to confirm that they allow Remote question is displayed select YES or HMI (RHMI).

  • Page 37: Power Saving Mode

    Driver Part Ready to drive   If a card is rejected as invalid, clean after veh. Check Care of Tachograph the chip and reinsert. If you abort the process during ongoing To obtain a long and trouble-free lifetime manual entries below will be displayed. for the tachograph please keep the following in mind: !...

  • Page 38: Change The Paper Roll

    To avoid malfunctioning only use printer system generation (generation 2 cards has process, press and hold the Back paper approved by Stoneridge. two file systems, gen 1 and gen 2). If so button. Wait until the message is the following is displayed:...
  • Page 39 Driver Part  1. Press the upper edge of the front  3. Feed the paper around the back of the panel. The panel opens. paper cassette and forwards, passing the lower edge of the panel.  6. Pull the paper upwards and tear it off.  2.
  • Page 40 Driver Part...
  • Page 41 Company Part Company Part   Company Settings - a few settings The Company Part contains information are only available for the company especially for the vehicle owners and staff and these settings are found hauliers who have certain responsibilities here. that are described in the following main sections: Note!

  • Page 42: Company Inspection

    Company Part inspection, the vehicle must be taken to a   The stored calibration factors as smart tachograph workshop for Company Inspection seen on the technical data printout inspection. The company inspection shall ensure that: agree with what is recorded on the If not it can result in a decision that the installation plaque.

  • Page 43: Lock-In/Lock-Out Data

    Company Part If two company cards are inserted the last inserted will be ejected. Lock-in/Lock-out Data If your company does not have an active The company owner can lock-in lock-in of data, a reminder to lock-in data tachograph data in order to make them will be shown: unreachable for unauthorized persons.

  • Page 44: Lock-In Data

    Company Part Note! Company lock-out The tachograph is able to handle a Lock-in Data maximum of 255 company locks. After  6. Select YES and press the OK to that the oldest company lock will be If company data is not locked-in, the perform the lock-in.

  • Page 45: Equipment

    Company Part destroy any data. Data is only erased When downloading is completed, the (destroyed) when it is overwritten by new following message will be displayed: Downloading Procedure data or by an accident. Downloading complete Note! Note! If the downloading process failed the If a driver card is inserted in tray 1, insert display will show the following warning: Consult the relevant authority for more...

  • Page 46: Download With Control Card

    Company Part authorities during any investigation or company may have several Company audit. Cards. Data Stored at Lock-in/out or It is good practice to keep a register of The Company Card must be inserted in Download undownloadability certificates issued from the tachograph in order to identify the Each time a company card is inserted into a smart tachograph workshop.

  • Page 47: Tachograph Stored Company Activity Data

    Company Part  9. Then press OK to confirm.     Card number. Card issuing member state of the   Issuing country, issuing authority card used to perform the download. WTD Presentation ON/OFF name and the issue date.   Card validity - start date and expiry By default the WTD (Working Time date.

  • Page 48: Set Activity When Switching Ignition Key On/Off

    Company Part  3. Press OK.  5. Press OK.  9. Press OK.  4. Select:  6. Select one of the following (depending Parameters on which setting you wish to make): Set Vehicle Registration Number Default activ. key on  5. Press OK. (VRN) Default activ.

  • Page 49: Begin And End Place

    Company Part  9. Select the character for the first  6. Select Ask working period country:   on/off - the presentation can be character in the vehicle registration Start/End reminder switched on (enabled) or switched number and press OK. Repeat until the  7.

  • Page 50: Dds Displays

    Company Part DDS Displays Display text Setting Description Set if the DDS shall be shown or not shown. This is available for both driver DDS enable on/off and company. Set if the warnings and the pre-warnings shall be shown or not. This is DDS warnings on/off available for both driver and company.
  • Page 51 Company Part veh. downl. Here the company can set the number of days between tachograph days interval download. Set how many minutes (hours) in advance the tachograph will give a pre- drive time hhmm warning. This setting affects all pre-warnings except the continuous driving pre-warning time pre-warning card expiry...

  • Page 52: Wtd Settings

    Company Part WTD Settings Display text Setting Description Set if the WTD shall be used (enable) or not used (disable). This is only available WTD enable YES/NO for company. Set if the 6 hour pre-warning and a 6h warning shall be shown or not. This is YES/NO available for company.

  • Page 53: Reference Part

    Tachograph is considered as a part of the needed but not frequently used. This part vehicle. contains: The local Stoneridge representative will be   pleased to assist you if you should have Display and Printout Symbols - any questions. You will find a list of local...

  • Page 54: Symbols

    Reference Part Symbol Description Symbol Description Tachograph (VU), vehicle Symbols Paper Tyre size Display This is a list of the most frequently shown Sensor symbols on the display and on the Processing, please wait printouts. Power supply Time, clock Print UTC time Symbol Description...

  • Page 55: Symbol Combinations

    Reference Part Symbols Description Symbols Description ! Company card Time overlap Symbol Combinations Driving without an appropriate Control card The following combination of symbols are ! card Control place the most common. ! Card insertion while driving From vehicle Symbols Description Last card session not correctly Position after 3 hours...

  • Page 56: Available Languages

    Reference Part Language Language in Country English Belarus Available Languages românã Romanian Belgium When you insert your card the pусский Russian Bosnia/Herzegovina Tachograph automatically changes to the slovenčina Slovakian Bulgaria language on the card. But you can select slovenščina Slovenian any of the following languages.
  • Page 57 Reference Part Country Country Malta - La Rioja Monaco - Madrid Montenegro - Murcia Netherlands - Navarra Norway - País Vasco Poland - Valencia Portugal Sweden Republic of Moldova Switzerland Romania Türkiye Russian Federation Turkmenistan San Marino Ukraine Serbia United kingdom , including: Slovakia - Alderney Slovenia...

  • Page 58: Built-In Test

    Reference Part Built-in Test The built-in test can be used to check the following tachograph components for correct operation:   Display   Driver card   Buttons   Printer   Invert display Perform a built-in test in the following way, but please note that the built-in test is only available when the vehicle is stationary.
  • Page 59 Reference Part Type of Test Description Action if Test Failed Display Display test Visit a smart tachograph workshop to have the The display shows positive view, negative view tachograph checked if the display is unreadable. and a pattern of rectangles for 1 second each. If the display is unreadable the tachograph has to be decommissioned and replaced.

  • Page 60: Other Tests

    Reference Part Other tests Type of Test Description Action if Test Failed GNSS test Check GNSS facility. Run "Info" ► "GNSS live Check if any external transmitter disturbs the view" to test the GNSS facility. If the GNSS satellite signal. Reposition the VU to the tachographhas a current GNSS position the bottom right hand side of the top shelf.

  • Page 61: Display Messages

    Reference Part a fault detected in the tachograph, in Display Messages the sensor or driver card. In addition There are four type of messages that can faults are presented if tampering be seen on the display. with the equipment is detected. Faults are stored and can be printed.
  • Page 62 Reference Part Display Description Action Message Stop the vehicle and try the entry again. Entry not possible while driving. Related to the operator. The VU is unable to detect any valid GNSS Make sure the GNSS antenna is not covered with Absence of satellite signal for a long time GNSS pos info...
  • Page 63 Reference Part Display Description Action Warning Withdraw the offending card. Card An invalid card combination has been detected. conflict Related to the card. Message Clean the card and the card slot with a soft damp Card eject Data could not be stored on the card withdrawn cloth and try again.
  • Page 64 Reference Part Display Description Action daily drive time Pre-warning - 9h daily drive time Warning - 9h daily drive time Pre-warning - daily drive time Three different warnings for reaching the allowed driving time. FaultThe user data stored in the tachograph has Visit a smart tachograph workshop to have the Data errors.Related to the tachograph...
  • Page 65 Reference Part Display Description Action No further action required. Message Download The tachograph download process has been complete completed successfully. Message Stop the vehicle. The card tray can be opened Driving An attempt was made to open the slot while the only when the vehicle is stationary.
  • Page 66 Reference Part Display Description Action Fault Visit a smart tachograph workshop to have the Hardware Card has been removed by force. Related to the equipment checked. sabotage operator. Warning Eject the non-valid card. Insertion of A non-valid card has been inserted to a slot. a non valid card Related to the operator.
  • Page 67 Reference Part Display Description Action Warning Plan for the calibration. Next mandatory calibration has to be carried out next calibration (d/m = Day /Month) Message Visit a smart tachograph workshop to have the No driver/ A function has been selected that requires an equipment checked.
  • Page 68 Reference Part Display Description Action Warning Visit a smart tachograph workshop to have the Power supply The tachograph supply voltage is below or equipment checked. interruption above the limit for correct operation or has been disconnected. Related to the vehicle. Warning The power supply to the tachograph has been interrupted for more than 200 milliseconds.
  • Page 69 Reference Part Display Description Action Message Replace paper. Printer out The ongoing printing has been interrupted of paper because the printer is out of paper. Printing Message Wait until the printout is finished. The printing is ongoing. busy Press and hold the Back button to cancel the printout Cancelling Message...
  • Page 70 Reference Part Display Description Action Tampering with hardware has been detected Visit a smart tachograph workshop to have the Security equipment checked. violation Fault Visit a smart tachograph workshop to have the Sensor The tachograph does not detect the sensor. equipment checked.
  • Page 71 Reference Part Display Description Action Warning Visit a smart tachograph workshop to have the Sensor data Signal failure between motion sensor and equipment checked. error tachograph. Related to the motion sensor. Fault Visit a smart tachograph workshop to have the Sensor data Internal motion sensor error, stored data integrity equipment checked.
  • Page 72 Reference Part Display Description Action Message Time for The legal maximum continuous driving time of break 4½ hours has elapsed. Minimum break 15 min Warning time for Take a break according to the 6 h WTD rule break Warning time for A warning for start of daily rest.
  • Page 73 Reference Part Display Description Action Fault Visit a smart tachograph workshop to have the Unauth. VU The Tachograph unit case has been opened. equipment checked. opening Related to the tachograph. Message Check DTCs to verify which of the triggers that Vehicle GNSS motion sensor and primary motions create the event.
  • Page 74 Reference Part Display Description Action !? GNSS Anomaly Fault Check for evidence of tampering with the unit, or devices interfering with the reception around the GNSS receiver has detected an attack, or failed tachograph. Restart the tachograph, verify if the in authenticating messages.

  • Page 75: Printout Examples

    Reference Part  GEN1  Printout Examples  22/10/2022 08:04 (UTC) On the following pages there are a number ----------------------- of printout examples that can be selected   from the PRINT menu: Generation 2   Daily printout (card) 24h card (including local time).

  • Page 76: Daily Printout (Card) (1/2)

    Reference Part  1. Type of data printed, GEN1 or GEN2  2. Printout date and time Daily Printout (card) (1/2)  3. Printout from a GEN2 v2 VU  4. Type of printout (24h, card) This printout lists all activities stored on  5. Card holder’s surname the driver card (or codriver card) for the  6.

  • Page 77: Daily Printout (Card) (2/2)

    Reference Part  27. Out of Scope Started, Out of Scope Ended  28. Ferry/Train Started, Ferry/Train Ended Daily Printout (card) (2/2)  29. Vehicle odometer at withdrawal and distance travelled since last insertion To make it easier to check the activities  30. Summary block indicator on the printout you can select local time  31.

  • Page 78: Daily Printout (Vu) (1/3)

    Reference Part  1. Printout date and time  2. Printout from a GEN2 v2 VU Daily Printout (VU) (1/3)  3. Type of printout (24h, VU)  4. Card holder’s surname This printout lists all activities stored in  5. Card holder’s first name the tachograph (VU) for the selected  6.

  • Page 79: Daily Printout (Vu) (2/3)

    Reference Part  30. Out of Scope Started, Out of Scope Ended  31. Ferry/Train Started, Ferry/Train Ended Daily Printout (VU) (2/3)  32. Vehicle odometer at withdrawal and distance travelled since last insertion To make it easier to check the activities  33. Slot relevant for below activities on the printout you can select local time  34.

  • Page 80: Daily Printout (Vu) (3/3)

    Reference Part  51. Driver’s surname and first name  52. Type of card, Issuing country, Card number Daily Printout (VU) (3/3)  53. Start of daily working period record  54. End of daily working period record  55. 3 hours of accumulated driving record  56.

  • Page 81: Events And Faults (Card)

    Reference Part  1. Type of data printed, GEN1 or GEN2  2. Printout date and time Events and Faults (card)  3. Printout from a GEN2 v2 VU  4. Type of printout (Events and Faults, card) This printout lists all warnings and faults  5.

  • Page 82: Events And Faults (Vu)

    Reference Part  1. Printout date and time  2. Printout from a GEN2 v2 VU Events and Faults (VU)  3. Type of printout (Events and Faults, VU)  4. Card holder’s surname, and first name This printout lists all warnings and faults  5.

  • Page 83: Drive Time Info

    Reference Part  1. Type of data printed, GEN1 or GEN2  2. Printout date and time Drive Time Info  3. Shows the time difference between UTC and local time.  4. Printout from a GEN2 v2 VU This printout lists drive time  5.

  • Page 84: Technical Data (1/2)

     14. Year of manufacturing  15. VU generation and version  16. VU software version and installation date  17. Digital map version, and Stoneridge map version  18. Sensor extended serial number  19. Sensor type approval number  20. Sensor pairing date and time  21.

  • Page 85: Technical Data (2/2)

    Reference Part  26. Date and time of calibration, and calibration purpose. Calibration purposes: Technical Data (2/2)  1. Activation (parameters when VU was activated)  2. First calibration of the VU after activation  3. First calibration in a new vehicle  4. Periodic inspection  5.

  • Page 86: Overspeeding

    Reference Part  1. Printout date and time  2. Printout from a GEN2 v2 VU Overspeeding  3. Type of printout (Over speeding), and authorized speed  4. Card holder’s surname, and first name This printout lists overspeeding events  5. Type of card, Issuing country, and Card number together with duration and the name of  6.

  • Page 87: Vehicle Speed

    Reference Part  1. Printout date and time  2. Printout from a GEN2 v2 VU Vehicle Speed  3. Type of printout (vehicle speed)  4. Card holder’s surname, and first name This printout lists the vehicle speed  5. Type of card, Issuing country, and Card number organized chronologically in speed  6.

  • Page 88: Engine Speed (Rpm)

    Reference Part  1. Printout date and time  2. Printout from a GEN2 v2 VU Engine Speed (rpm)  3. Type of printout (engine speed)  4. Card holder’s surname, and first name This printout lists the vehicles engine  5. Type of card, Issuing country, and Card number speed in bands of rpm in chronological  6.

  • Page 89: Status D1/D2

    Reference Part  1. Printout date and time  2. Printout from a GEN2 v2 VU Status D1/D2  3. Type of printout (Status D1/D2)  4. Card holder’s surname, and first name This printout lists the changes of status  5. Type of card, Issuing country, and Card number of the rear connectors (D1 and D2).

  • Page 90: Manual Entry Sheet

    Reference Part  1. Printout date and time  2. Printout from a GEN2 v2 VU Manual Entry Sheet  3. Type of printout (Manual Entry Sheet) and UTC offset  4. Card holder’s surname, and first name This is a printout sheet for hand writing  5.

  • Page 91: Data And Specifications

    This table reflects what the DDS covers compliance with Regulation (EC) card. and not covers. 561/2006. Stoneridge shall not be held   Extremely frequent activity changes. responsible for any defects or Type Support  ...

  • Page 92: Certification And Approval

    Reference Part Reduced weekly rest 24h Max interval (144h since end) Certification and Approval Data stored in the Tachograph Assigning to one week The tachograph is approved for use in the The tachograph records and stores various Multi-manning European Union and certified to Common data: Regular/reduced rests in two Criteria level EAL4+ in accordance with...

  • Page 93: Driver Activity Data

    Reference Part Card holder’s surname and first Driving status: single or part of a Vehicle Registration Number (VRN) name. crew. for vehicles used by the card holder. Driver card number, card issuing Card tray used in the tachograph. Controls performed by authorities. Card inserted or not inserted at the member state and the card expiry Data is stored automatically on the card,...

  • Page 94: Driver Activity Data

    Reference Part The vehicle registration number and Electromagnetical Compability registering member state of the vehicle. The tachograph fulfils the requirements of Vehicle position UNECE regulation number 10, revision Vehicle type, goods or passenger 05, in respect of electromagnetic compatibility. Driver Activity Data Data stored for each day and change of Operating Temperature driving activity:...

  • Page 95: Atex Tachograph

    Reference Part Stoneridge can be found at: Note! www.stoneridgeelectronics.com The ATEX Tachograph will enter the ATEX Tachograph power saving mode immediately after the ignition is switched off. Hazardous Goods Vehicles To have the ATEX Tachograph fully operational, the ignition key must be in...

  • Page 96: Index

    Change Menus Activities 13, 17 Motions Sensor (Sensor) Activity when stationary Approval Language ATEX manual entry ATEX tachograph version Contact Stoneridge 1, 93 Paper Special features Control Manual Power saving mode Available 13, 17 Print menu Printer DDS (Driver Decision...
  • Page 97 Index Tachograph Trays (1= Driver, 2 = Co-driver) Unaccounted time Vehicle Unit (Tachograph) VRN (Vehicle Registration Number) 31 Work 13, 17 Workshop Manual WTD (Working Time Directive) 45, 50...
  • Page 98 Stoneridge Electronics AB Adolfsbergsvägen 3 702 27 Örebro, Sweden www.stoneridgeelectronics.com www.se5000.com...

Table of Contents

Save PDF