Table of Contents
Advertisement
ANTENNA
CABLE
CABLE OR ANTENNA
ANTENNA
CABLE
H
D
M
OUTPUT
Note:
The first time
/OUT
IN
(TO TV)
(and only the first time) you turn on your set
3
you see an installation introduction screen. The
installation procedure consists of a series
of screens that guide you through the process.
Cable box
After an introduction screen, you are asked to
select a language of the TV's on-screen menus.
Press the cursor up/down to highlight your
2
language.
(The text of the header and the info on screen
continuously change language.)
Press the OK button.
3
Follow the on-screen instructions to proceed.
4
75
I
1
H
D
M
I
2
CABLE OR ANTENNA
75
2
- Cable box with S-Video, component video (YPbPr)
or HDMI connectors
See "Cover and connection"
- Antenna
Through an antenna, you can watch any HDTV programs
that are broadcast in your area without paying fees.
If you're not sure what HDTV programming is available in
your area, contact your local content provider or your
local electronics retailer.
Broadcasters are currently transitioning from analog to digital
TV. This means that a given broadcaster will have two
channels on the air, one analog and one digital.
Connect the incoming antenna signal to the CABLE/
ANTENNA 75
See page 12 for details on using Autoprogram to store
channels in the TV's memory.
Note: This connection will supply stereo sound to the TV if it is
being broadcast by the station you are watching.
- Direct Broadcast Satellite (DBS)
Satellite systems offer many of the same premium channels
available on cable systems, often at a lower price. To view
these channels, you'll need to install a small dish antenna
outside your home.
The two main DBS systems, DirecTV and DishNetwork,
require separate, proprietary set-top receiver boxes to
decode their signals and send them to your digital TV set.
These boxes may include a digital TV tuner for off-air DTV
broadcasts.
Satellite broadcasters also provide major local channels,
depending on the market in which you live.
DBS also provides service in areas not covered by cable
because they are in rural areas or other areas not passed by a
cable line.
DBS also allows you to watch pay-per-view events.
To connect accessory devices, see Cover and Connection.
3
Refer to the bottom of the set (Model label) for the
4
correct operation voltage.
Insert the power cord into the wall socket.
Consult your local dealer if your main power supply voltage is
different than that indicated for the TV. Never place the TV
on top of the (AC) cord. Placing the TV on top of the AC cord
could cause a fire or electric shock.
Remote control:
5
Insert the two supplied AAA batteries.
The batteries supplied do not contain the heavy metals mercury
and cadmium. Please determine and comply with local
regulations when disposing of depleted batteries.
Turn the TV on:
6
Press the power switch
indicator on the front of the TV lights up.
Press the POWER button or the CH + / - button on the
remote control.
7
jack at the bottom of the TV.
at the front side of the TV. An
Advertisement
Table of Contents
