Safety And Troubleshooting Information - Philips 150X4FS Electronic User's Manual

Safety and Troubleshooting Information

•Safety
Safety and Troubleshooting Information
Precautions
and
Maintenance
• Installation
Locations
Safety precautions and maintenance
• FAQs
• Troubleshooting
• Regulatory
Information
• Other Related
Information
Read and follow these instructions when connecting and using your computer monitor:
Consult a service technician if the monitor does not operate normally when the operating instructions
given in this manual have been followed.
Installation Locations
file:///D|/My%20documents/dfu/B2C/ENGLISH/150X4/safety/safety.htm (1 of 2) [3/1/2004 5:54:59 PM]
WARNING: Use of controls, adjustments or procedures other than those
specified in this documentation may result in exposure to shock,
electrical hazards and/or mechanical hazards.
Unplug the monitor if you are not going to use it for an extensive period of time.
Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped
with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based
liquids.
Consult a service technician if the monitor does not operate normally when you have followed
the instructions in this manual.
The casing cover should be opened only by qualified service personnel.
Keep the monitor out of direct sunlight and away from stoves or any other heat source.
Remove any object that could fall into the vents or prevent proper cooling of the monitor's
electronics.
Do not block the ventilation holes on the cabinet.
Keep the monitor dry. To avoid electric shock, do not expose it to rain or excessive moisture.
When positioning the monitor, make sure the power plug and outlet are easily accessible.
If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds
before attaching the power cable or DC power cord for normal operation.
To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain or
excessive moisture.
IMPORTANT: Always activate a screen saver program during your application. If a still image in
high contrast remains on the screen for an extended period of time, it may leave an 'after-image'
or 'ghost image' on front of the screen. This is a well-known phenomenon that is caused by the
shortcomings inherent in LCD technology. In most cases, the after-image will disappear
gradually over a period of time after the power has been switched off. Be aware, that the after-
image symptom cannot be repaired and is not covered under warranty.
RETURN TO TOP OF THE PAGE