Cleaning the appliance
Clean your appliance before using it for the first time.
Remove the accessories from the cooking compartment.
1.
Completely remove any residual packaging (e.g. chips of
2.
polystyrene) from the cooking compartment.
Operating the appliance
In this section, you can read about
how to switch your appliance on and off
■
how to select an operating mode and temperature
■
Switching on the appliance
Turn the operating mode selector until the desired operating
1.
mode is selected.
Turn the temperature selector until the desired temperature is
2.
selected.
The
indicator lamp lights up while the appliance is heating
r
up and during any subsequent heating.
Electronic clock
In this section, you can read about
how to set the timer
■
how to switch your appliance off automatically (cooking time
■
and end of operation)
how to switch your appliance on and off automatically (preset
■
operation)
how to set the time
■
Clock function
Minute minder
Q
Cooking time
x
End of operation
y
Preset operation
Clock
3
8
3.
4.
5.
6.
Switching off the appliance
1.
2.
After the appliance is switched off, the cooling fan may
continue to run.
Clock display
Use
You can use the minute minder as an egg timer or a kitchen timer. The appliance does
not switch on or off automatically
The appliances switches off automatically after a cooking time setting has elapsed
(e.g.
‚
:
„‹
hours)
The appliance switches off automatically at a set time (e.g.
The appliance switches on and off automatically. Cooking time and end of operation
have been combined.
Setting the clock
Clean the accessories and cooking compartment with hot
soapy water (see section: Cleaning and care).
Heat with
CircoTherm® at 240 °C for 60 minutes.
3
Afterwards, wipe the cooled cooking compartment with hot,
soapy water.
Clean the outside of the appliance with a soft, damp cloth
and soapy water.
Turn the operating mode selector back to the
Turn the temperature selector back to the
position.
Û
position.
Ú
:
o'clock)
‚ƒ
„‹