Philips 150MT10P-00C User Manual page 44

Troubleshooting
An after-image remains after the power
has been turned off.
Green, red, blue, dark, and white dots
remains
TV and Audio Problems
Poor TV signal reception
No TV picture
No sound
For further assistance, refer to the
file:///D|/TV/english/150mt/safety/saf_troub.htm (2 of 2) [6/4/2002 10:52:47 AM]
This is characteristic of liquid crystal and is not caused by a
malfunction or deterioration of the liquid crystal. The after-image will
disappear after a set amount of time
The remaining dots are normal characteristic of the liquid crystal
used in today's technology.
The proximity of mountains or high buildings may be responstible for
ghost pictures, echoing or shadows. In this case, try manually
adjusting your pictures: see"fine tuning" or modify the orientation of
the outside aerial. Does your attenna enable you to receive
broadcasts in this frequency range (UHF or VHF band)? In the event
of difficult reception (snowy pictures) switch the NR on the PICTURE
menu to ON.
Have you connected the aerial socket properly? Have you chosen
the right system? Poorly connected SCART cables or aerial sockets
are often the cause of picture or sound problems (sometimes the
connectors can become half disconnected if the Monitors set is
moved or turned). Check all connections.
Ensure that the audio cables are firmly connected to both the audio
input connectors on your Monitor and audio output connectors on
your PC or Video players.
If on certain TV channels you receive a picture but no sound, this
means that you do not have the correct TV system. Modify the
SYSTEM setting.
Consumer Information Centers
RETURN TO TOP OF THE PAGE
list to contact your local Philips distributor.