Advertisement
80-Point Touch Overlay
Installation Guide for the OLP-404
6.6 With the help from at least one partner, gently install the overlay on the monitor.
6.6.1 Hook the top bracket of the overlay on the top of the monitor.
6.6.2 Slide the overlay toward the bottom of the monitor. The sides of the overlay will slide past the
sides of the monitor.
6.6.3 Lower the overlay down to the monitor surface.
6.7 Be sure the USB cable is toward the top of the monitor and is not crushed or pinched during
installation.
6.8 Be sure not to scratch or damage the monitor or PCAP film while installing the overlay.
6.9 Double check the monitor panel and overlay glass for dirt, smudges, or dust before securing
the overlay to the monitor.
www.necdisplay.com
Step 6.6.2
OLP-404
NEC Display Solutions of America, Inc.
Step 6.6.1
Step 6.6.3
Rev 1.3
4
Advertisement
