Mounting The Ceiling Bracket; Mounting The Back-Pressure Flap - Bosch HIB82651UC Installation Instructions Manual

Mounting the ceiling bracket
1. Drill holes according to the drill template.
2. Fasten the ceiling bracket to the ceiling.
j_
Mounting the extractor hood on the ceiling
WARNING
RISK OF INJURY
The appliance is heavy. To move the appliance, 2
people are required. Use only suitable tools and
equipment.
1. Lift the extractor hood with the vertical brackets into
the ceiling bracket until it snaps in audibly.
3. Fasten the 4 lower vertical brackets to the extractor
hood with 16 screws.
4. Fasten the lower horizontal bracket with 8 screws.
B
/
/
5. Fasten the 4 upper vertical brackets with 16 screws,
while maintaining the noted distance to the cooktop,
see Chapter Calculating the installation height.
I
2. Secure the extractor hood with 16 screws.
Mounting the back-pressure flap
Using 4 screws (4x8 mm), attach the back-pressure flap
to the extractor hood.
11