Ducting Options - Bella PUCBL430SS Use, Care And Installation Manual

Ducting Options

Closely follow the instructions set out in this manual.
All responsability, for any eventual inconveniences, damages or fires caused by not complying with the instructions in this
manual, is declined.
Ductless (Recirculating)
NOTE:
In cases where it should not be
possible to discharge cooking fumes
and vapour to the outside, purchase:
The Recirculating Kit.
Use a rectangular duct 3
cm) or use a 7" (17.8 cm) round transition for
discharge of fumes to the outside.
Preparation
Do not cut a joist or stud unless absolutely necessary. If a joist or
stud must be cut, then a supporting frame must be
constructed.
Fittings material is provided to secure the hood to most types of
walls/ceilings.
However, a qualified technician must verify suitability of the
materials in accordance with the type of wall/ceiling.
Before making cutouts, make sure there is proper clearance
within the ceiling or wall for exhaust vent.
CAUTION
For gas cooktop & range installations: Mount the hood so the
bottom is at least 30" (76.2 cm) above the cooking surface.
6
⁄ " x 10" (8.3 x 25.4
1
4
Use a rectangular duct
3 ⁄ " x 10" (8.3 x 25.4 cm)
1
4
for discharge of fumes to the
outside.
Vertical Discharge
For electric/induction cooktop & range installations: Mount the
hood so the bottom is at least 24" (61 cm) above the cooking
surface.
There is no maximum mounting height, however, we recommend
mounting the hood no greater than 36" (91.4 cm) above the
cooking surface. For every inch (2.54 cm) above 36" (91.4 cm),
fume and moisture capture efficiency diminishes at an increasing
rate and may not deliver an acceptable level of ventilating
performance.
This hood is intended for household use.
PLEASE READ THE INSTALLATION MANUAL FOR SPECIFIC
APPLICATION. Check your ceiling height and hood height
before selecting your hood.
Horizontal Discharge