DiSEqC 1.2
: Control motor to change satellite dish position.
Drive Direction
Select the direction in which you want to move the motor.
Drive Mode
Two modes are available : Step and Continuous.
Step : The motor moves based on the value you enter (from 1 to 128).
●
Continuous
●
Test Transponder
Select the test Transponder you want to tune.
Set Limit
Set the motor movement to east or west to have the motor move only within the
direction set.
On : You can limit the movement to the current direction by selecting the West/East.
●
Off : You can cancel the limit you set.
●
Go to 0
You can move the motor to Zero.
USALS
: Set your current location (Longitude/Latitude).
To Use Manual Programme Tuning
General Programmes Programme Tuning (Programme Tuning &
Settings)
Manual Tuning
This function is for manually searching and saving programmes.
For digital broadcasting, signal strength and signal quality can be checked.
Editing
Transponder
General Programmes Programme Tuning & Settings Transponder
Edit
: The motor moves continuously until you press the Stop.
97