Advertisement
4. ASSEMBLY
4 & 5.
In each corner of the base attach the
Castor and tighten the fixings.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
.
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our
technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
1.
Lift the main rollcab body off
the base and topchest.
01284 703534
Original Language Version
2.
Remove the 4 screws on
the bottom of the topchest
assembly, then remove the
base from the bottom of the
topchest.
BG150BS | Issue:2 H,F) 10/06/18
sales@sealey.co.uk
AP2513B.V4, AP22513BB.V3 Issue 1 11/03/22
3.
Reattach the base to the
bottom of the rollcab ensuring
it is the correct way up and
secure with the supplied
fixings.
6.
Attach the topchest side handles using the
2 x bolts. Insert the side handle into the
Rollcab and attach using 4 x bolts and
Washers.
www.sealey.co.uk
Advertisement
