RESEARCH CONCEPTS RC2K90INT-1 Manual page 28

6 Bill Of Materials
Quan Model/Description
50' LA11-50
8 GY-4Q-50
5 GY-4Q-950
1 GY-4Q-450
2 KKR-21
1
24' 8772 cable
25' 01306
32' 13002
6 Butt Connector
16 Spade Terminal
14 UR Connector
16" FIT-221-3/64
8" FIT-221-1/4
6" FIT-221-3/8
8 4" cable tie
10 6" cable tie
10 8" cable tie
12 9772
2 GI752
2 2 1/2" Jumpers, 16 AWG
1 Tube of RTV Sealer
2 314 012
2 314 008
1 9841
Note: These fuses are equivalent the Buss type ABC (normal blow, ceramic).
Manufacturer Comments (Ref Designators)
Electri-Flex 1/2" Liquid Tight Steel Core Flexible Conduit
Oz/Gedney 1/2" Straight Conduit Connector
Oz/Gedney 1/2" 90 Degree Conduit Connector
Oz/Gedney 1/2" 45 Degree Conduit Connector
Killark 3/4" to 1/2" Conduit Bushing
1/2" Teflon Tape (for conduit fittings)
Belden 3 conductor shielded cable with drain 20 AWG
Carol 16/3 Motor Connect Cable
Carol 18/2 Limit Switch Connect Cable
Crimp Type, Insulated, 16-14 AWG for Motor
Connections
Crimp Type, Insulated, 22-16 AWG for Limit
Switch Connections
3M Red Scotchlok with dielectric grease
Alpha 3/64" heat shrink - Covers Drain Wire at
Sensor Cable Splice
Alpha 1/4" heat shrink - Covers the Break in the
Insulation at the Sensor Cable (Belden 8772)
Splice
Alpha 3/8" heat shrink - Covers the Break in the
Insulation at the Sensor Cable (user supplied)
Splice
Tie for Sensor Cable Splice
Tie for General Use Inside Interface Box
Tie Used to Join Azim/Elev Motor and
Sensor/Limit Conduits (Weather Proof and
Ultraviolet Resistant)
Dell City Wire Adhesive Cable Tie Point
Co.
General High Current Steering Diode for Limit
Instrument Switches
For Use in Limit Switches
Used for Misc. Sealing
Littlefuse 12 Amp Ceramic AC Line Fuse for KBPB [1]
Littlefuse 8 Amp Ceramic Armature Fuse for KBPB [1]
KB Electronics, 0.025 ohm Plug-In Horsepower Resistor for
Inc. KBPB-225 Motor Drive Module. This
appropriate for use with the Baldor CDP 3330
1/2 Horsepower, 1750 RPM 90 volt DC motors
used on the Prodelin 3.8 meter antenna.
28
Prodelin 3.8m Antenna Installation Kit