Philips 107T60 Service Manual page 22

22 107T6 CRT
Go to cover page
Step 2. Load Hex file and input the bootcode.
1. Click , choose programs at start menu of Windows95/98 ,
find I2cHaI2c-Control Programs as shown in Fig. 8.
Programms
2. Click the ''I2cHaI2c-Control Programs'',bring up the below
window as shown in Fig. 9.
3. Click Bootcode-string, choose the third row and input the
following codes ''0x6e, 0x42, 0x41, 0x43, 0x4b, 4x74, 0x6f,
0x42, 0x4f, 0x4f, 0x54'', then click ''close window''.
4. Click ''load file'', bring up the following window as shown in Fig 11.
ISP (In System Program)
Fig. 8
Fig. 9
(Fig. 10)
Fig. 11
5. Choose the Demic. Hex from C:\107T6, the left side of the window
will show the file name"Demic.hex", click "Demic.hex" of the left
side of the window, then click "Load file",shown as Fig. 12.
Fig. 12
Step 3. Run EDID46 program.
1. Click
shown in Fig. 13.
Fig. 10
C:\107T6
C:\
C:
, choose Run at start menu of Windows95/98 as
Fig. 13