Table of Contents
Advertisement
Basics
3
Press and hold the Fn key and press the F4 key repeatedly,
then select Extend for project mode.
4
Select Start.
A frame for selecting area will appear.
Start is activated only when the project mode is set to
Extend.
5
Drag
to select an area to show in an external display and
select Done.
The selected area will be shown on the external display.
To fix the ratio of the selected area to the ratio of the external
→ the Fixed ratio switch to activate it.
display, select
To stop displaying the screen, select Stop.
Selected
area
Using tools
While showing the screen on the connected display, you can write
or draw on the screen using the following tools.
Cursor mode
Pen mode
Highlighter
mode
While using the pen or highlighter, select the desired icon again to
change the color or line thickness.
26
Undo/Redo
Eraser mode
Advertisement
Table of Contents
