Tripp Lite APS 1024 INT Owner's Manual page 35

Diagramas/Esquemas
1
See "Configuration", pg. 5. 1.1 is DIP Switch Group A. 1.2 is DIP Switch Group B.
Refiérase a la sección "Configuración", pg. 22. 1.1 representa el Interruptor DIP, Grupo A. 1.2 representa el Interruptor DIP, Grupo B.
2
4
"FOR USE WITH COPPER WIRE ONLY"
HOT IN
NEUTRAL IN
GROUND IN
GROUND OUT
HOT OUT
NEUTRAL OUT
1.2 1.1
3
See Hardwire Electrical Connections, pg. 10.
3.1 is the cover plate;
3.2 is the DC input connector;
3.3 is the HOT IN terminal (brown);
3.4 is the NEUTRAL IN terminal (blue);
3.5 is the GROUND IN terminal (green & yellow);
3.5 is the GROUND OUT terminal (green & yellow);
3.6 is the HOT OUT terminal (black); and
3.7 is the NEUTRAL OUT terminal (white).
Refiérase a la sección Conexiones eléctricas directas al
circuito, pg. 27.
3.1 representa la placa de cobertura;
3.2 representa el conector de entrada de CC;
3.3 representa el terminal HOT IN (marrón);
3.4 representa el terminal NEUTRAL IN (azul);
3.5 representa el terminal GROUND IN (verde y amarillo);
3.5 representa el terminal GROUND OUT (verde y amarillo);
3.6 representa el terminal HOT OUT (negro); y
3.7 representa el terminal NEUTRAL OUT (blanco).
18 35
3.3 3.4 3.5
"FOR USE WITH COPPER WIRE ONLY"
HOT IN
NEUTRAL IN
GROUND IN
GROUND OUT
HOT OUT
NEUTRAL OUT
3.2
3.1
3.6 3.7 3.8